Original scientific paper

Waterjet rough finishing of stone surface

Raimondo Ciccu ; DIGITA - Department of Geo-engineering and Environmental, Technologies University of Cagliari, Piazza d'Armi, Cagliari 09123, Italy
Giorgio Costa ; DIGITA - Department of Geo-engineering and Environmental, Technologies University of Cagliari, Piazza d'Armi, Cagliari 09123, Italy

Abstract

The paper deals with the assessment of the potential application of plain waterjet for surface treatment of stone materials as an alternative to technologies traditionally employed for this task, like bush-hammering, sand-blasting and flaming. Waterjetting has been already proposed in the market for rough finishing of surfaces making use of a fast rotating head provided with multiple nozzles. At the University of Cagliari considerable research has already been carried out using either abrasive or plain waterjet, stationary or pulsed, generated through a fan-type nozzle aiming at obtaining an evenly treated surface. A particular goal of the tests described in the paper is that of developing a technique enabling to make engravings on the stone in order to achieve special aesthetic effects. The experimental results obtained on a broad set of rocks show that the technology is viable on both technical and economic grounds, allowing to obtain excellent results at a relatively low processing cost by resorting to multiple line nozzles.

Keywords

stone; surface finishing; water jet

Hrčak ID:

83918

URI

https://hrcak.srce.hr/83918

Publication date:

29.6.2012.

Article data in other languages: croatian

Visits: 4.179 *