Professional paper

Calculation and design of a conical gearbox with manual wheel

Božidar Hršak orcid.org/0000-0001-7226-5460 ; Visoka tehnička škola Bjelovar, Bjelovar, Hrvatska
Tatjana Badrov orcid.org/0000-0002-9918-7818 ; Visoka tehnička škola Bjelovar, Bjelovar, Hrvatska
Vedran Lovrić ; Visoka tehnička škola Bjelovar, Bjelovar, Hrvatska

Abstract

The paper presents the control calculation of geometry, load and contact stress of conical gear pair teeth in the MechSoft.com UniTools software for the exit moment T2 = 70 Nm, number of drive bevel gear teeth z1 = 16, number of driven bevel gear teeth z2 = 48, module m = 5 and the material of the drive and driven bevel gear GGG 60 (nodular cast iron). Based on the existing 2D documentation in cast construction, a 3D model of the conical gear pair was designed in the Power Transmission module of the SolidWorks software. Furthermore, using the advanced design tools, other parts were made and assembled in a reconstructed 3D assembly of a single-stage conical gearbox. Thereafter, a control stress test of drive gear shaft was carried out in the SimulationXpress Analysis Wizard software.

Keywords

reinforcement; driven bevel gear; nodular cast iron; drive bevel gear; driving shaft; manual wheel; conical gearbox

Hrčak ID:

112060

URI

https://hrcak.srce.hr/112060

Publication date:

10.12.2013.

Article data in other languages: croatian

Visits: 3.253 *