Original scientific paper

https://doi.org/10.17559/TV-20150416181432

Determination of the effect of edge banding thickness and aging period on the MOR and MOE of melamine coated particle board using Taguchi method

Cevdet Sacli ; Selcuk University, Technical Science Collage, Program of Furniture and Decoration, 42075, Konya, Turkey
Suleyman Neseli ; Selcuk University, Faculty of Technology, Department of Mechanical Engineering, 42075, Konya, Turkey

Abstract

In this study, the aging period (20, 30, 40 and 50 days), the edge banding thickness (0,4; 0,8;1,0 and 2,0 mm) and the type of force used (bending strength-MOR and tensile strength-MOE) were the parameters selected for analysis of the effects on the mechanical properties of melamine coated particle board. To do this, Taguchi's methodology for the design of experiments was used to optimize the process parameters. Trials are conducted using an L16 orthogonal array with 16 combinations of test variables to assess the influence of various factors. Analysis of variance was also employed to investigate which design parameters significantly affect the mechanical properties of melamine coated particle board. The statistical analysis showed that the type of force used was the most significant factor affecting the response. The simulated and experimental results also showed good agreement with each other.

Keywords

aging; bending and tensile strength; Taguchi method; wood composite

Hrčak ID:

163751

URI

https://hrcak.srce.hr/163751

Publication date:

16.8.2016.

Article data in other languages: croatian

Visits: 2.167 *