Original scientific paper
https://doi.org/10.17559/TV-20150520132311
Increase of the operating life of active parts of cold-moulding tools
Ján Moravec
; University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia
Full text: english pdf 922 Kb
page 143-146
downloads: 325
cite
APA 6th Edition
Moravec, J. (2017). Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik, vol. 24, no. Supplement 1, 2017, pp. 143-146. https://doi.org/10.17559/TV-20150520132311. Accessed 30 Nov. 2024.
Chicago 17th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik 24, no. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Increase of the operating life of active parts of cold-moulding tools', Tehnički vjesnik, 24(Supplement 1), pp. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik [Internet]. 2017 [cited 2024 November 30];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Increase of the operating life of active parts of cold-moulding tools", Tehnički vjesnik, vol.24, no. Supplement 1, pp. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311
Full text: croatian pdf 922 Kb
page 143-146
downloads: 465
cite
APA 6th Edition
Moravec, J. (2017). Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik, vol. 24, no. Supplement 1, 2017, pp. 143-146. https://doi.org/10.17559/TV-20150520132311. Accessed 30 Nov. 2024.
Chicago 17th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik 24, no. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Increase of the operating life of active parts of cold-moulding tools', Tehnički vjesnik, 24(Supplement 1), pp. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik [Internet]. 2017 [cited 2024 November 30];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Increase of the operating life of active parts of cold-moulding tools", Tehnički vjesnik, vol.24, no. Supplement 1, pp. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311
Abstract
Heat treatment of active components of cold – moulding tools is a necessary operation to guarantee their functionality. The tools made by this method loose the required quality of durability and period of service and losses caused by their frequent exchange are high. One way we can stop it is by coating the active parts of pressing tools by thin, hard and abrasion resistant deposit that is suitable by definite method of the tool stress.
Keywords
Cold-moulding tool; EDAX analysis; Hardness; PVD coating; TiCN
Hrčak ID:
181252
URI
https://hrcak.srce.hr/181252
Publication date:
10.5.2017.
Article data in other languages:
croatian
Visits: 1.941
*
