Skip to the main content

Original scientific paper

https://doi.org/10.17559/TV-20150921113741

Surface quality and machining time optimization based on feedrate correction function of tool trajectories types

Florea Dorel Anania orcid id orcid.org/0000-0002-1607-6339 ; University Politehnica of Bucharest, Machines and Production System Department, Spl. Independentei, nr. 313, sector 6, RO-060042 Bucuresti, Romania
Andra Elena Pena ; University Politehnica of Bucharest, Machines and Production System Department, Spl. Independentei, nr. 313, sector 6, RO-060042 Bucuresti, Romania
Miron Zapciu ; University Politehnica of Bucharest, Machines and Production System Department, Spl. Independentei, nr. 313, sector 6, RO-060042 Bucuresti, Romania


Full text: croatian pdf 1.247 Kb

page 987-992

downloads: 643

cite

Full text: english pdf 1.247 Kb

page 987-992

downloads: 787

cite


Abstract

Today, any CAM software offers some different tool trajectories strategies for milling free form geometries. In any finishing milling operation the most important objective is the surface quality. However, the CAM users must have the know-how to choose the tool trajectories according to geometry complexity, cutting tool geometry and its contact on the machined surface. The quality of the surface and machining time is influenced also by tool trajectories. Research results presented in this paper are focused on determination of a correction factor for cutting parameters based on tool trajectories type. To validate experimental correction factor, optimum feed rates are calculated for each type of trajectories based on surface quality and machining time analysis for inclined surfaces. The finishing procedures are made with a ball end milling tool.

Keywords

cutting parameters; machining time; milling; surface roughness; tool trajectory

Hrčak ID:

185438

URI

https://hrcak.srce.hr/185438

Publication date:

31.7.2017.

Article data in other languages: croatian

Visits: 2.776 *