Original scientific paper
https://doi.org/10.24138/jcomss.v15i2.693
A 10-17 DOF Sensory Gloves with Harvesting Capability for Smart Healthcare
Vincenzo Stornelli
; Dept.of Industrial and Information Engineering and Economics P.le Pontieri 1, 67100, Monteluco di Roio L’Aquila, Italy
Alfiero Leoni
; Dept.of Industrial and Information Engineering and Economics P.le Pontieri 1, 67100, Monteluco di Roio L’Aquila, Italy
Giuseppe Ferri
; Dept.of Industrial and Information Engineering and Economics P.le Pontieri 1, 67100, Monteluco di Roio L’Aquila, Italy
Vito Errico
; Dept.of Electronic Engineering via del Politecnico 1, 00133, Roma, Italy
Antonio Pallotti
; Dept.of Electronic Engineering via del Politecnico 1, 00133, Roma, Italy
Giancarlo Orengo
; Dept.of Electronic Engineering via del Politecnico 1, 00133, Roma, Italy
Giovanni Saggio
; Dept.of Electronic Engineering via del Politecnico 1, 00133, Roma, Italy
Abstract
We here present a 10-17 Degrees of Freedom (DoF) sensory gloves for Smart Healthcare implementing an energy harvesting architecture, aimed at enhancing the battery lasting when powering the electronics of the two different types of gloves, used to sense fingers movements. In particular, we realized a comparison in terms of measurement repeatability and reliability, as well as power consumption and battery lasting, between two sensory gloves implemented by means of different technologies. The first is a 3D printed glove with 10 DoF, featuring low-cost, low-effort fabrication and low-power consumption. The second is a classical Lycra® glove with 14 DoF suitable for a more detailed assessment of the hand postures, featuring a relatively higher cost and power consumption. An electronic circuitry was designed to gather and elaborate data from both types of sensory gloves, differing for number of inputs only. Both gloves are equipped with flex sensors and in addiction with the electronics (including a microcontroller and a transmitter) allow the control of hand virtual limbs or mechanical arts in surgical, military, space and civil applications.Six healthy subjects were involved in tests suitable to evaluate the performances of the proposed gloves in terms of repeatability, reproducibility and reliability. Particular effort was devoted to increase battery lasting for both glove-based systems, with the electronics relaying on Radio Frequency, Piezoelectric and Thermoelectric harvesters. The harvesting part was built and tested as a prototype discrete element board, that is interfaced with an external microcontroller and a radiofrequency transmitter board. Measurement results demonstrated a meaningful improvement in battery operation time up to 25%, considering different operating scenarios.
Keywords
Sensory glove; Energy harvesting; power management
Hrčak ID:
220969
URI
Publication date:
1.6.2019.
Visits: 924 *