Original scientific paper

Signal-to-noise analysis of the elevator boosting performance of flat-tube-and-fin heat exchanger

J. X. Zhu ; College of Automotive Engineering, Hebei College of Science and Technology, Tangshan 063210, China *
X. Liu ; College of Automotive Engineering, Hebei College of Science and Technology, Tangshan 063210, China
Z. C. Xu ; College of Automotive Engineering, Hebei College of Science and Technology, Tangshan 063210, China
C. Y. Han ; College of Automotive Engineering, Hebei College of Science and Technology, Tangshan 063210, China
C. A. Dai ; College of Automotive Engineering, Hebei College of Science and Technology, Tangshan 063210, China
X. C. Qian ; Steelmaking Department, Shougang Jingtang United Iron and Steel Co, Ltd, Tangshan 063210, China

* Corresponding author.

Abstract

In this work, after the elevators shaped by NACA 0012 were proposed for the Flat-tube-and-fin heat exchanger (FTFHE) with an experimental validation, a signal-to-noise (SNR) analysis was considered for the contribution rate (CR) of structural parameters. It is found that, for CR, chord length dominates with 43,44 % as the minimum 13,11 % escort orientation point. Besides those, the mounted angle of 0°, the chord length of 6,4 mm, the extruded length of 1 mm or Orientation point 6 might only benefit heat transfer, while 8°, 6 mm or 0,9 mm purely serves pressure loss disregarding orientation point.

Keywords

flat-tube-and-fin heat exchanger; NACA 0012; performance enhancement; elevator; SNR analysis

Hrčak ID:

319868

URI

https://hrcak.srce.hr/319868

Publication date:

1.1.2025.

Visits: 0 *