Original scientific paper

Verification of new model for calculation of critical strain for the initialization of dynamic recrystallization using laboratory rolling

R. Fabík ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
T. Kubina ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
S. Aksenov ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
K. Drozd ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
I. Schindler ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
J. Kliber ; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic

Abstract

This paper presents a new model for calculation of critical strain for initialization of dynamic recrystallization. The new model reflects the history of forming in the deformation zone during rolling. In this region of restricted deformation, the strain rate curve for the surface of the strip exhibits two peaks. These are the two reasons why the onset of dynamic recrystallization DRX near the surface of the rolled part occurs later than in theory during strip rolling. The present model had been used in a program for simulation of forming processes with the aid of FEM and a comparison between the physical experiment and a mathematical model had been drawn.

Keywords

steel; hot rolling; finite element method (FEM); dynamic recrystallization

Hrčak ID:

38697

URI

https://hrcak.srce.hr/38697

Publication date:

1.10.2009.

Article data in other languages: croatian

Visits: 1.387 *