Izvorni znanstveni članak

A measurement system for the fabrication inspection of linear and rotary axes in a 5‐axis tool grinder

Yung-Cheng Wang ; National Yunlin University of Science and Technology, Faculty of Mechanical Engineering, No. 123, University Rd., Section 3, 640 Douliou, Yunlin, Taiwan
Chi-Hsiang Chen ; National Formosa University, Institute of Mechanical and Electro-Mechanical Engineering, No. 64, Wunhua Rd., 632 Huwei, Yunlin, Taiwan
Bean-Yin Lee ; National Formosa University, Department of Mechanical and Computer-Aided Engineering, No. 64, Wunhua Rd., 632 Huwei, Yunlin, Taiwan
Tun-Hao Liang ; National Formosa University, Department of Mechanical and Computer-Aided Engineering, No. 64, Wunhua Rd., 632 Huwei, Yunlin, Taiwan
Te-Shing Chung ; National Yunlin University of Science and Technology, Faculty of Mechanical Engineering, No. 123, University Rd., Section 3, 640 Douliou, Yunlin, Taiwan

Sažetak

Due to rapid developments in the modern cutting technology, the demand for all kinds of high precision tools has been relatively increased. The final processing of tools denotes the grinding of the cutting edge which is known as the most important procedure. It is also a critical issue for determining the geometrical profiles, cutting performance, and tool life. Therefore, this study is concerned with the development of a measurement system for the error analysis and compensation of linear and rotary axes during the fabrication process of a 5-axis tool grinder. The results show that the dimensional accuracy of the diameter will be enhanced to 0,002 mm with the positioning compensation. And the spiral geometrical accuracy will be improved to 0,011 degrees. Hence it can be proved that the performance of a tool grinder has been promoted and its precision and quality have also been significantly improved with the aid of the proposed measurement system for a 5-axis tool grinder.

Ključne riječi

error compensation; linear and rotary axes; 5-axis tool grinder

Hrčak ID:

86732

URI

https://hrcak.srce.hr/86732

Datum izdavanja:

19.9.2012.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.201 *