Metalurgija, Vol. 56 No. 3-4, 2017.
Izvorni znanstveni članak
Interrupted quenching in high carbon steels for forgings
G. Napoli
S. Mengaroni
; ThyssenKrupp Acciai Speciali Terni, Terni, Italy
M. Rallini
; Università di Perugia, Dipartimento di Ingegneria Civile ed Ambientale, Perugia, Italy
L. Torre
; Università di Perugia, Dipartimento di Ingegneria Civile ed Ambientale, Perugia, Italy
A. Di Schino
; Università di Perugia, Dipartimento di Ingegneria, Perugia, Italy
Sažetak
The present study is focused on analyzing the effect of the interrupted quenching followed by a partitioning process in a high carbon steel 0,50 % C, 1,50 % Mn, 0,40 % Si, 2,00 % Cr without significant contribution of Al. Thermal treatments were performed at laboratory scale in a quenching dilatometer Linseis R.I.T.A RL78. The fractions of retained austenite were evaluated by scanning electron microscope. The temperature for the interrupted quenching phase was evaluated based on the Koistenen and Marburger equation (adapted to the 0,50 % C steel) and the result highlights a correlation between the chosen different temperature of quenching and the fraction of retained austenite formed during the quenching step of the process.
Ključne riječi
steel; heat treatment; quenching; temperature; microstructure
Hrčak ID:
180977
URI
Datum izdavanja:
1.7.2017.
Posjeta: 1.642 *