Metallurgy, Vol. 56 No. 1-2, 2017.
Original scientific paper
Ultrafinegrained structure of D16 aluminium alloy after rolling in the corrugated rolls and on the longitudinal-wedge mill
A. Mashekova
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
A. Turdaliev
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
A. Kawalek
; Czestochowa University of Technology, Czestochowa, Poland
S. Mashekov
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
U. Murzakhmetova
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
L. Kurmangaliyeva
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
N. Smagulova
; Institute of Industrial Engineering, Kazakh National Research Technical University after K. Satpayev, Almaty, Kazakhstan
Abstract
The article explains the influence of number of passes on the parameters of the microstructure of D16 aluminium alloy during rolling in the corrugated rolls, and the impact of the drafts while rolling of the strips on the longitudinal wedge mill. A comparative evaluation of the grain size of the ultrafine grained structure was conducted after rolling strips in the corrugated rolls by various passes, and after rolling on the longitudinal wedge mill at deformation temperature of 320 °C. It is shown that the sheet material of D16 aluminium alloy ensures uniform formation of an ultrafine grain structure with the size of about 220 - 240 nm, which leads to increased strength properties of the alloy and preserve good ductility.
Keywords
aluminium; rolling, strip; severe plastic deformation; ultrafine grained structure
Hrčak ID:
168903
URI
Publication date:
2.1.2017.
Visits: 1.024 *