Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150520132311
Increase of the operating life of active parts of cold-moulding tools
Ján Moravec
; University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia
Puni tekst: engleski pdf 922 Kb
str. 143-146
preuzimanja: 325
citiraj
APA 6th Edition
Moravec, J. (2017). Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 143-146. https://doi.org/10.17559/TV-20150520132311. Citirano 27.11.2024.
Chicago 17th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik 24, br. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Increase of the operating life of active parts of cold-moulding tools', Tehnički vjesnik, 24(Supplement 1), str. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik [Internet]. 2017 [pristupljeno 27.11.2024.];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Increase of the operating life of active parts of cold-moulding tools", Tehnički vjesnik, vol.24, br. Supplement 1, str. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311
Puni tekst: hrvatski pdf 922 Kb
str. 143-146
preuzimanja: 465
citiraj
APA 6th Edition
Moravec, J. (2017). Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 143-146. https://doi.org/10.17559/TV-20150520132311. Citirano 27.11.2024.
Chicago 17th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik 24, br. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Increase of the operating life of active parts of cold-moulding tools', Tehnički vjesnik, 24(Supplement 1), str. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik [Internet]. 2017 [pristupljeno 27.11.2024.];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Increase of the operating life of active parts of cold-moulding tools", Tehnički vjesnik, vol.24, br. Supplement 1, str. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311
Sažetak
Heat treatment of active components of cold – moulding tools is a necessary operation to guarantee their functionality. The tools made by this method loose the required quality of durability and period of service and losses caused by their frequent exchange are high. One way we can stop it is by coating the active parts of pressing tools by thin, hard and abrasion resistant deposit that is suitable by definite method of the tool stress.
Ključne riječi
Cold-moulding tool; EDAX analysis; Hardness; PVD coating; TiCN
Hrčak ID:
181252
URI
https://hrcak.srce.hr/181252
Datum izdavanja:
10.5.2017.
Podaci na drugim jezicima:
hrvatski
Posjeta: 1.941
*
