Tehnički vjesnik, Vol. 24 No. 4, 2017.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150909075338
Cooling simulation of conformal cooling injection mould insert produced by hybrid manufacturing
David Homar
; Faculty of Mechanical Engineering, University of Ljubljana, Askerceva 6, 1000 Ljubljana, Slovenia
Luka Čerče
; Faculty of Mechanical Engineering, University of Ljubljana, Askerceva 6, 1000 Ljubljana, Slovenia
Janez Kopač
; Faculty of Mechanical Engineering, University of Ljubljana, Askerceva 6, 1000 Ljubljana, Slovenia
Sažetak
Cooling of injection moulds manufactured by machining has limitations because cooling channels are formed by conventional straight holes. With additive manufacturing, the cooling channels can be produced in the shape which is adjusted to the cavity and core surface of injection moulds. Those kinds of cooling channels are called the conformal cooling channels. Conformal cooling channels can significantly reduce cycle time of plastic injection moulding process and significantly improve the quality of products. Thus, in this work conformal cooling channels for industrial case study were constructed and analysed. Besides expected tests, cooling simulation has been performed, comparing conventional and proposed cooling technology. Results have been confirmed also by testing prototype with conformal cooling channels, showing significant improvement in reducing cycle time, more than 40 %.
Ključne riječi
additive manufacturing; conformal cooling; cooling simulation; hybrid manufacturing
Hrčak ID:
185499
URI
Datum izdavanja:
31.7.2017.
Posjeta: 3.354 *