Metalurgija, Vol. 58 No. 1-2, 2019.
Izvorni znanstveni članak
Calculation of heat transfer coefficients
F. Vode
; Institute of Metals and Technology, Ljubljana, Slovenia
F. Tehovnik
; Institute of Metals and Technology, Ljubljana, Slovenia
B. Arh
; Institute of Metals and Technology, Ljubljana, Slovenia
S. Malej
; Institute of Metals and Technology, Ljubljana, Slovenia
B. Podgornik
; Institute of Metals and Technology, Ljubljana, Slovenia
Sažetak
In forced-convection furnaces for reheating Al-alloys, convective heat transfer mechanism dominates. Al-body temperature prediction model uses measured furnace temperature as boundary condition. To calibrate such model, a convective heat transfer coefficient h is to be determined. Optimization technique is used here to determine h for every measured temperature sample so that measured temperatures match calculated, supposing radiative heat transfer coefficient constant and neglecting conductive heat transfer. Obtained h stably converges during normal reheating conditions. The obtained model is 4-fold cross-validated and obtained Root Mean Square Error of whole reheating profiles are [7,7; 20,4; 10,4; 12,5] °C.
Ključne riječi
Al-body; convective heat transfer; forced-convection furnace; mathematical model; measured temperatures
Hrčak ID:
206473
URI
Datum izdavanja:
1.1.2019.
Posjeta: 1.594 *