Prethodno priopćenje

Achievements in the titanium production development

K. Sh. Akhmetova ; Satbaev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan
B. K. Kenzhaliev ; Satbaev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan
S. A. Trebukhov ; Satbaev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan
A. V. Nitsenko orcid.org/0000-0001-6753-0936 ; Satbaev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan
N. M. Burabaeva ; Satbaev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan

Sažetak

Titanium sponge process flowchart includes the following main operations: concentrates reduction melting (example for concentrate from the Obukhovskoe field, the Republic of Kazakhstan), chlorination of obtained titanium slug, refining of industrial tetrachloride and ma gnesium-thermic reduction of titanium tetrachloride purified from any impurities. This paper presents the results of material flows balance studies and quality analysis of the technological products. It is shown that stillage bottoms pulp feed on the melt mirror of potassium chloride electrolyte with a speed less than 2,5 t/h excludes the temperature overshoot within 570 - 620 °C of titanium tetrachloride vapors sublimation. Chlorinator melt bubbling in the process initial period with dried air (nitrogen) can significantly improve the quality of titanium products.

Ključne riječi

titanium production; stillage bottoms pulp; titanium chlorides; vanadium oxychloride/pentoxide; Kazakhstan

Hrčak ID:

241220

URI

https://hrcak.srce.hr/241220

Datum izdavanja:

1.10.2020.

Posjeta: 1.477 *