Izvorni znanstveni članak

https://doi.org/10.21278/TOF.44305

Multiple Attribute Decision Making with Interval Uncertainty for Artillery Recoil Resistance

Rong Li ; School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, P.R. ChinaThe 724 Research Institute of China Shipbuilding Industry Corporation, Nanjing, P.R. China
Quanzhao Sun ; School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, P.R. ChinaInner Mongolia North Heavy Industries Group Corp. Ltd, Baotou, P.R. China
Jie Zhang ; Inner Mongolia North Heavy Industries Group Corp. Ltd, Baotou, P.R. China
Yanming Song ; Inner Mongolia North Heavy Industries Group Corp. Ltd, Baotou, P.R. China
Guolai Yang ; School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, P.R. China
Baochun Lu ; School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, P.R. China

Sažetak

To reduce loads acting on artillery carriages and obtain better values of recoil resistance, a study on multiple attribute decision making with interval uncertainty of the liquid orifice of a recoil mechanism was conducted. Taking the dimensions of the liquid orifice as the uncertainty variables, the uncertainty optimization model and algorithm based on three parameter interval were used to achieve the optimization schemes of the throttling bar outer dimensions with different tolerance grades. The multiple optimization schemes were sorted by employing the multiple attribute decision making method, in which the attribute weights were determined based on the maximum deviation method. The results show that the optimal design scheme is the one which considers simultaneously the parameter design and tolerance design of the throttling bar outer diameters. The optimal interval of the recoil resistance peaks and the optimal recoil resistance curve with sufficient fullness and flatness were obtained. The study results are beneficial for artillery design and evaluation concerning both the manufacturability of artillery and particular requirements of recoil resistance.

Ključne riječi

Artillery recoil resistance; multiple attribute decision making; interval uncertainty; optimization evaluation; uncertainty of dimensions

Hrčak ID:

244857

URI

https://hrcak.srce.hr/244857

Datum izdavanja:

29.10.2020.

Posjeta: 1.573 *