Prethodno priopćenje

https://doi.org/10.31803/tg-20220407192100

Analysis of the Cross-Wire Welding Process Stability

Ivana Čabrijan orcid.org/0000-0002-0821-6389 ; University of Rijeka, Faculty of Engineering Vukovarska 58, 51000 Rijeka, Croatia
Domagoj Vrtovšnik orcid.org/0000-0003-1134-8873 ; University of Rijeka, Faculty of Engineering Vukovarska 58, 51000 Rijeka, Croatia
Maja Vlatković orcid.org/0000-0002-8620-7939 ; University of Rijeka, Faculty of Engineering Vukovarska 58, 51000 Rijeka, Croatia
Duško Pavletić orcid.org/0000-0002-5940-0012 ; University of Rijeka, Faculty of Engineering Vukovarska 58, 51000 Rijeka, Croatia

Sažetak

The research paper was prepared within the framework of a project whose aim is to improve the durability of the corrosion protection properties of the product by regulating the input parameters of the cross-wire welding process. Cross-wire welding is a subtype of electric resistance welding. Products made by the cross-wire welding process are widely used in everyday life and can be found in the form of grids, gratings, fencing systems, baskets, guards, etc. The subject of the research work is a preliminary analysis of the stability of the cross-wire welding process. The results of the performed analysis will serve as a starting point for the second phase of the project. Since the recorded values of the set down output parameter differ significantly from the expected values, this parameter is considered as an indicator of the process stability. From the specific trend of the results in the performed analysis, it was concluded that the position of the electrode has a significant influence on the result, which was confirmed by comparing the test results before and after the preliminary tests.

Ključne riječi

cross-wire welding; electric resistance welding; process stability; welding process

Hrčak ID:

276155

URI

https://hrcak.srce.hr/276155

Datum izdavanja:

8.5.2022.

Posjeta: 1.272 *