Skoči na glavni sadržaj

Glasnik Zaštite Bilja, Vol. 45. No. 4., 2022.

Stručni rad

https://doi.org/10.31727/gzb.45.4.9

Development trends in self-propelled forage harvesters

Tomaž Poje ; Kmetijski inštitut Slovenije, Ljubljana, Slovenija

Puni tekst: hrvatski pdf 417 Kb

str. 88-95

preuzimanja: 319

citiraj

Preuzmi JATS datoteku

Sažetak

The use of self-propelled forage harvesters is increasing for chopping various silage crops. The power of their engines is increasing and currently stands at 850 kW. According to the use of silage, the chopping length is also important. The chopping length is determined by the number of knives attached to the drum and the number of revolutions of the drum. Most manufacturers also install NIR analyzers, which allows the determination of dry matter and other analyzes in the feed. The operating parameters of the forage harvester and chopped forage are visible directly in the combine or remotely.

Ključne riječi

self-propelled forage harvester; engine power; chopper; NIR analyzer; telematics systems

Hrčak ID:

281310

URI

https://hrcak.srce.hr/281310

Datum izdavanja:

14.7.2022.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.071 *

License (open-access, http://creativecommons.org/licenses/by/2.5/):

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

License (open-access):

Ovo je članak s otvorenim pristupom distribuiran pod uvjetima licence Creative Commons Attribution, koji dopušta neograničenu upotrebu, distribuciju i reprodukciju u bilo kojem mediju, pod uvjetom da se izvorno djelo pravilno citira.

License (open-access):

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Date received: 24 June 2022

Date accepted: 4 July 2022

Publication date: 14 July 2022

Volume: 45

Issue: 4

Pages: 88-95

DOI: 10.31727/gzb.45.4.9

Article Information (continued)

Categories:

Subject: Stručni rad

Categories:

Subject: Case-report

Keywords:

Keyword: samokretni silažni kombajn

Keyword: snaga motora

Keyword: sječka

Keyword: NIR analizator

Keyword: telematski sistemi

Keywords:

Keyword: self-propelled forage harvester

Keyword: engine power

Keyword: chopper

Keyword: NIR analyzer

Keyword: telematics systems

Trendovi razvoja kod samokretnih silažnih kombajna

Translated Title (en): Development trends in self-propelled forage harvesters

Tomaž Poje[1]

Email: tomaz.poje@kis.si

 

[1] Kmetijski inštitut Slovenije, Ljubljana, Slovenija

Abstract

Samokretni silažni kombajni sve više se upotrebljavaju kod sjeckanja različitih usjeva za silažu. Snaga njihovih motora povećava se i trenutačno iznosi i 850 kW. Prema upotrebi silaže važna je i dužina sječke. Dužina sječke određuje se brojem noža pričvršćenih na bubanj i brzinom vrtnje bubnja. Većina proizvođača ugrađuje i NIR analizatore, koji omogućuje određivanje suhe tvari i druge analize u krmi. Izravno u kombajnu ili na daljinu prati se radne karakteristike silažnog kombajna i sjeckane krme.

Translated Abstract

The use of self-propelled forage harvesters is increasing for chopping various silage crops. The power of their engines is increasing and currently stands at 850 kW. According to the use of silage, the chopping length is also important. The chopping length is determined by the number of knives attached to the drum and the number of revolutions of the drum. Most manufacturers also install NIR analyzers, which allows the determination of dry matter and other analyzes in the feed. The operating parameters of the forage harvester and chopped forage are visible directly in the combine or remotely.

This display is generated from NISO JATS XML with jats-html.xsl. The XSLT engine is libxslt.