Ostalo
https://doi.org/10.5281/zenodo.6913106
Elements of ultrasonic flowmeter installation, model OMNI TDI 200H with test work results
Merima Toromanović
orcid.org/0000-0001-5795-9405
; Faculty of Biotechnology, University of Bihać, Luke Marjanovićabb, 77000 Bihac, Bosnia and Herzegovina
Jasmina Ibrahimpašić
; Faculty of Biotechnology, University of Bihać, Luke Marjanovićabb, 77000 Bihac, Bosnia and Herzegovina
Ifet Šišić
; Faculty of Biotechnology, University of Bihać, Luke Marjanovićabb, 77000 Bihac, Bosnia and Herzegovina
Samira Hotić
; Faculty of Biotechnology, University of Bihać, Luke Marjanovićabb, 77000 Bihac, Bosnia and Herzegovina
Sažetak
Ultrasonic flowmeter works on the principle of transmitting and returning ultrasonic waves that pass through the liquid, ie. fluid, and is used to measure the speed of fluid movement through a pipeline or some other structural form of fluid movement. By knowing the velocity of the fluid and the cross-sectional area of the pipeline or other system, the value of the volumetric or mass flow can be obtained indirectly. Fluid flow measuring device model OMNI TDI 200H owned by the laboratory of the Biotechnical Faculty was used for the first time to measure the flow of purified water at the outlet of the plant device of the training center "Grmeč", built as a pilot plant. The paper will describe the role and importance of flow measurement by the conventional method and present the results of the trial operation of an ultrasonic flow meter, model OMNI TDI 200H.
Ključne riječi
ultrasonic meter,installation elements,flow
Hrčak ID:
294684
URI
Datum izdavanja:
30.6.2022.
Posjeta: 486 *