Drvna industrija, Vol. 74 No. 1, 2023.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2023.0037
Effects of Medium Density Fiberboards (MDF) Recycling Methods on Fiber Dimensions and Some Reconstructed Board Properties
Çagri Olgun
orcid.org/0000-0002-0811-0381
; Kastamonu University, Faculty of Forestry, Department of Forest Industrial Engineering, Kastamonu, Turkey
Saim Ateş
; Kastamonu University, Faculty of Forestry, Department of Forest Industrial Engineering, Kastamonu, Turkey
Emre Uzer
; TOBB Kastamonu Commodity Exchange, Kastamonu, Turkey
Sažetak
In this study, different methods, including acid hydrolysis (phosphoric and formic acid), thermohydrolysis, and microwave methods were tested for recycling of fiberboards made of 100 % beech and 70 % beech + 30 % pine wood fibers, which are widely sold in the market. The impacts of the using methods on the fibers were investigated with the help of a device that determines the fiber dimensions according to optical principles. In a laboratory setting, test boards were constructed using recycled fibers, and the changes in certain physical and mechanical qualities were studied. As a result, it was determined that recycled fibers obtained from microwave and thermo-hydrolysis fibers could be effectively used in fiberboard production. However, the proportion of fibers, longer than 1.24 mm, was decreased by about 30 % with the phosphoric acid method for MDF samples composed of 100 % beech fiber. The fiberboards could not be obtained from fibers recycled through acid hydrolysis except for phosphoric acid method with 100 % beech fibers.
Ključne riječi
waste MDF; recycling; recycled fibers; fiber properties; board strenght
Hrčak ID:
296391
URI
Datum izdavanja:
25.3.2023.
Posjeta: 533 *