Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.30765/er.2103

Hybrid sensorless control of PMSM in full speed range using HFI and back-EMF

Slimane Medjmadj ; ETA Laboratory, Faculty of Sciences and Technology, University of Bordj Bou Arreridj, Algeria.


Puni tekst: engleski pdf 1.466 Kb

str. 93-104

preuzimanja: 239

citiraj


Sažetak

The permanent magnet synchronous motors (PMSM) are more and more used because of their high performance compared with other AC motors. The present paper proposes a hybrid controller which consists of a high frequency injection estimator and a back-electromotive-force observer in full speed range for the sensorless control of PMSM. The aim objective of the study to prevent speed overshot in startup time of the motor and provides a better dynamic response in transient and permanent states using this structure. A hybrid algorithm is applied to realize a smooth transition from low to high speed. At standstill and very low speed region, HF injection technique is used to detect the rotor initial position. In this first step study, the position estimation is derived from a HF current injection by using only one filter. When the rotor speed goes up to a certain value where back-EMF can provide adequate information, a back-EMF observer will dominate. Thanks to this structure, the mechanical sensor can be engaged using the best estimates and the developed control method is fast, simple, and flexible. The effectiveness, superiority, and performance of the proposed control method and extensive simulation results are provided on a 1 kW permanent magnet synchronous motor drive, demonstrating the expected performances.

Ključne riječi

back-EMF; PMSM; high frequency injection; hybrid controller

Hrčak ID:

301738

URI

https://hrcak.srce.hr/301738

Datum izdavanja:

14.3.2023.

Posjeta: 497 *