Original scientific paper

https://doi.org/10.15255/KUI.2013.033

Catalytic Oxidation of Phenol over Zeolite Based Cu/Y-5 Catalyst: Part 2: Influence of Postsynthesis Thermal and Chemical

K. Maduna Valkaj ; Department of Reaction Engineering and Catalysis, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
V. Mandić ; Department of Inorganic Chemical Technology and Non-Metals, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
A. Katovic ; Department of Environmental and Chemical Engineering, University of Calabria, Arcavacata di Rende, Italy

Abstract

The most important and the most vulnerable part of the global ecosystem are surface waters. Tothis day, numerous scientific investigations have been conducted in to develop new technologies for most effective purification of wastewaters polluted with organic compounds such as phenol and its derivatives. Catalytic wet peroxide oxidation, known as the CWPO process, is one of the methods that can be used for the minimization of organic pollution in practice. With the use of a catalyst (homogeneous or heterogeneous), the process can be successfully operated under mild conditions with low energy consumption (atmospheric pressure and temperatures below 353 K). Zeolites modified with copper possess good catalytic properties when compared to the other types of heterogeneous catalysts tested in CWPO reaction. Based on the literature overview and actual trends in scientific research concerning development of new catalytic oxidation processes for treatment of wastewaters burdened with organic pollutants, Y-5 FAU type of zeolite was selected as catalyst support for copper cations. In this paper, second in a series, investigated was the influence of reaction parameters, synthesis and postsynthesis chemical and thermal treatment of the prepared catalyst on its catalytic properties. The catalyst was prepared by ion exchange method of the protonic form of commercial zeolite. In order to obtain the catalyst with optimum catalytic properties, chemical (H₂SO₄ wash) and thermal postsynthesis treatment (calcination) was conducted. The catalysts were characterized with powder X-ray diffraction (PXRD) and AAS elemental analysis, while the adsorption techniques were used for the measurement of the specific surface area. Activity and stability of such prepared catalysts was tested in catalytic wet peroxide oxidation of phenol in aqueous medium. The mass fraction of the active metal component on the zeolite was 3.46 %, 3.97 % and 0.94 % before and after postsynthesis thermal and chemical treatment, respectively. The postsynthesis treatment had a profound positive impact on the stability of both the catalytically active component and the support of the catalyst. At the same time, its activity in the CWPO process remained very good or had even improved. With the use of a copper bearing zeolite based catalyst, the complete removal of phenol is obtained even when substoichiometric quantity of oxidant is used. Bearing that in mind, future research will be oriented towards the application of these catalysts in the CWPO process with industrial grade effluents that contain phenol and other phenolic compounds. Good results on model phenolic wastewaters are indicative of its possibly successful integration into the existing industrial and municipal wastewater treatment facilities. CWPO process could be, for example, coupled with the biological treatment in order to reduce the toxicity of the phenolic effluent prior to aerobic/anaerobic digestion. In that case, some of the by-products of CWPO phenol oxidation, such as acetic acid, could be used as a substrate.
The obtained experimental data was tested to a proposed kinetic model for phenol oxidation r_Ph = k₁ c_Ph c_HP and hydrogen peroxide decomposition r_HP = k₂ c_HP. The kinetic parameters were estimated using the Nelder-Mead method of nonlinear regression. Good accordance between the experimental (dots) and theoretical data (lines) was obtained. The kinetic model used for hydrogen peroxide decomposition showed somewhat less compliance with the experimental data. This can be attributed to the fact that hydrogen peroxide present in the reactor participates not only in the oxidation of phenol molecules but in other reactions such as oxidation of intermediates, hydrogen peroxide dissociation, decomposition on the reactor wall, which contributes to its ineffective dispense in this reaction system.

Keywords

Catalytic wastewater purification; oxidation of phenol; hydrogen peroxide; copper; zeolites; postsynthesis treatment; catalyst activity and stability

Hrčak ID:

136269

URI

https://hrcak.srce.hr/136269

Publication date:

13.3.2015.

Article data in other languages: croatian

Visits: 2.192 *