Original scientific paper
Development of a Sensorized Timber Processor Head Prototype – Part 1: Sensors Description and Hardware Integration
Jakub Sandak
orcid.org/0000-0001-9190-677X
; INNORENEW CoE Livade 6 SI-6310 Izola SLOVENIA Andrej Marušič Institute University of Primorska Muzejski trg 2 SI-6000 Koper SLOVENIA CNR-IVALSA via Biasi 75 I-38010 San Michele all’Adige ITALY
Anna Sandak
orcid.org/0000-0002-2515-0991
; INNORENEW CoE Livade 6 SI-6310 Izola SLOVENIA Andrej Marušič Institute University of Primorska Muzejski trg 2 SI-6000 Koper SLOVENIA CNR-IVALSA via Biasi 75 I-38010 San Michele all’Adige ITALY
Stefano Marrazza
; COMPOLAB via dell’Artigianato 53 I-57121 Livorno ITALY
Gianni Picchi
orcid.org/0000-0002-1262-6778
; CNR-IVALSA via Madonna del piano 10 I-50019 Sesto Fiorentino ITALY
Abstract
Forest operations are in constant development to provide increasingly higher standards of economic and environmental sustainability. The latest innovation trends are concentrated in the generation, storage and management of data related to the harvesting process, timber products and logistics operations. Current technologies provide productivity and position, but only physical parameters are made available for timber products. The possibility of providing a comprehensive quality evaluation of roundwood early in the supply chain and linking the information to each log provides a new tool for optimization of the whole forest-timber supply chain. Current in-field methods for grading logs are based on visual rating scales, which are subjective, operator-dependent and time-consuming. As an alternative, a sensorized processor head was developed, featuring the following sensors: near infrared (NIR) spectrometer and hyperspectral cameras to identify surface defects, stress wave and time of flight sensors to estimate timber density, hydraulic flow sensor to estimate cross-cutting resistance and delimbing sensors to estimate branches number and approximate position. The prototype also deployed an RFID UHF system, which allowed the identification of the incoming tree and individually marked each log, relating the quality parameters recorded to the physical item and tracing it along the supply chain. The tested sensors were installed and designed to be independent, nevertheless, their integrated use provides a comprehensive evaluation of timber quality. This paper presents the technical solutions adopted, the main hindrances found and some preliminary results of the operative prototype as tested in laboratory and in forest operational conditions.
Keywords
timber quality; processor head; sensors; NIR; cutting forces
Hrčak ID:
217392
URI
Publication date:
14.1.2019.
Visits: 1.066 *