Pregledni rad
https://doi.org/10.17559/TV-20140922143741
Dependence of mechanical properties on Cu content in AlSi9Cu3(Fe) alloy
Maja Vončina
; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Materials and Metallurgy, Aškerčeva c. 12, 1000 Ljubljana, Slovenia
Nataša Močnik
; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Materials and Metallurgy, Aškerčeva c. 12, 1000 Ljubljana, Slovenia
Aleš Nagode
; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Materials and Metallurgy, Aškerčeva c. 12, 1000 Ljubljana, Slovenia
Antun Stoić
; Mechanical Engineering Faculty in Slavonski Brod, J. J. Strossmayer University of Osijek, Trg Ivane Brlić Mažuranić 2, 35 000 Slavonski Brod, Croatia
Milan Bizjak
; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Materials and Metallurgy, Aškerčeva c. 12, 1000 Ljubljana, Slovenia
Sažetak
AlSi9Cu3(Fe) aluminium alloy is one of the most commonly used casting aluminium alloys because their utility is based on good mechanical properties. Production often leads to deviations of maximum levels for certain alloying elements, particularly copper. Since mechanical properties of the final products of these alloys strongly depend on the concentration of copper in the alloy, various concentrations of copper were added to the basic alloy whereas the chemical composition was monitored using an optical emission spectrometer, measuring Brinell hardness and doing tensile tests. Moreover, the impacts of copper on oxidizing and corrosion resistance of the experimental alloys were analysed. The alloy with 3 wt. % Cu showed the best results.
Ključne riječi
Al-Si-Cu alloy; corrosion resistance; mechanical properties
Hrčak ID:
181267
URI
Datum izdavanja:
10.5.2017.
Posjeta: 7.672 *