Tehnički vjesnik, Vol. 30 No. 4, 2023.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20210929102016
Construction Stage Seismic Resilience Evaluation of a Continuous Girder Bridge with the Cast-in-Place Cantilever Construction Method
Hongxu Li
; 1) Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China 2) Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China 3) Beijing Academy of Emergency Management Science and Technology, Beijing 101101, China.
Yong Huang
orcid.org/0000-0003-2538-7013
; 1) Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China 2) Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China
Endong Guo
; 1) Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China 2) Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China
Sažetak
To rapidly evaluate the seismic resilience of the bridges under construction, the construction stage seismic resilience evaluation method was proposed. Based on
a case bridge of continuous girder with the cast-in-place cantilever construction method, the seismic resilience of bridges at different construction stages was researched
and compared. The bridge model was established by utilizing the construction stage module in the Midas Civil finite element modelling software. The functional losses of the
bridges at different construction stages were computed. The three dimensional functional surfaces of Function-Time-PGA (Peak Ground Acceleration) were drawn. The
resilience indexes at different construction stages with different seismic PGAs were compared, the resilience indexes with and without consideration of the delay recovery
period were compared and analysed. The research results show: 1) in the control period, the functional loss is directly proportional to the PGA, but the function and resilience
indexes are inversely proportional to the PGA; 2) the seismic resilience indexes of bridges at different construction stages are vastly different; 3) the resilience indexes with
and without consideration of the delay recovery period are different; for the case bridge with the delay recovery period to recovery period ratio of 20%, the difference of the
resilience indexes with and without consideration of the delay recovery period can reach 17% when the seismic PGA is 1.0 g. This paper provides a new method to evaluate
the seismic resilience of construction stages, and it can be used to provide suggestions for the seismic damage evaluation and post-seismic recovery scheme.
Ključne riječi
bridge; cantilever construction; construction stage; seismic resilience; seismic vulnerability
Hrčak ID:
305444
URI
Datum izdavanja:
28.6.2023.
Posjeta: 1.129 *