hrcak mascot   Srce   HID

Prethodno priopćenje

Influence of the activating flux on weld joint properties at arc stud welding process

I. Samardžić ; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Slavonski Brod, Croatia
D. Bajić ; Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro
Š. Klarić ; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Slavonski Brod, Croatia

Puni tekst: engleski, pdf (265 KB) str. 325-329 preuzimanja: 862* citiraj
APA 6th Edition
Samardžić, I., Bajić, D. i Klarić, Š. (2010). Influence of the activating flux on weld joint properties at arc stud welding process. Metalurgija, 49 (4), 325-329. Preuzeto s https://hrcak.srce.hr/57440
MLA 8th Edition
Samardžić, I., et al. "Influence of the activating flux on weld joint properties at arc stud welding process." Metalurgija, vol. 49, br. 4, 2010, str. 325-329. https://hrcak.srce.hr/57440. Citirano 04.12.2021.
Chicago 17th Edition
Samardžić, I., D. Bajić i Š. Klarić. "Influence of the activating flux on weld joint properties at arc stud welding process." Metalurgija 49, br. 4 (2010): 325-329. https://hrcak.srce.hr/57440
Harvard
Samardžić, I., Bajić, D., i Klarić, Š. (2010). 'Influence of the activating flux on weld joint properties at arc stud welding process', Metalurgija, 49(4), str. 325-329. Preuzeto s: https://hrcak.srce.hr/57440 (Datum pristupa: 04.12.2021.)
Vancouver
Samardžić I, Bajić D, Klarić Š. Influence of the activating flux on weld joint properties at arc stud welding process. Metalurgija [Internet]. 2010 [pristupljeno 04.12.2021.];49(4):325-329. Dostupno na: https://hrcak.srce.hr/57440
IEEE
I. Samardžić, D. Bajić i Š. Klarić, "Influence of the activating flux on weld joint properties at arc stud welding process", Metalurgija, vol.49, br. 4, str. 325-329, 2010. [Online]. Dostupno na: https://hrcak.srce.hr/57440. [Citirano: 04.12.2021.]

Sažetak
In this paper, the influence of the activating flux on the weld joint properties at the drawn arc stud welding process with ceramic ferrule is analysed. In the experimental part of the paper, the arc stud welding process is applied with the application of the activating flux for ATIG process. In order to evaluate the influence of the activating flux on the welding process parameters variations, the main welding parameters were monitored by an on-line monitoring system. Besides monitoring of welding current and voltage, the influence of the activating flux on the weld joint appearance is investigated. The macrosections of the weld joints welded with the same parameters, but with and without the presence of activating flux are shown.

Ključne riječi
arc stud welding; activating flux; on-line monitoring; macrosection analysis

Hrčak ID: 57440

URI
https://hrcak.srce.hr/57440

[hrvatski]

Posjeta: 1.326 *