Tehnički vjesnik, Vol. 22 No. 3, 2015.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20140530103847
Stress and strain analysis during the Sleme tunnel excavation
Tomislav Hrestak
; Viadukt d.d., Kranjčevićeva 2, 10000 Zagreb, Croatia
Antonia Jaguljnjak Lazarević
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Pierottijeva 6, 10000 Zagreb, Croatia
Lidija Frgić
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Pierottijeva 6, 10000 Zagreb, Croatia
Sažetak
The distribution of stresses and strains during the portal section excavation for the right tube of the Sleme Tunnel is analysed by the Finite Element Method (FEM). Results of analyses obtained using 2D and 3D models have been compared to in-situ measurements of tunnel convergence and ground surface settlements. Multistage excavations with pipe roof support of the working face were modelled. The numerical models verified that for this particular case a sufficiently safe and cost-efficient construction technology was applied.
Ključne riječi
Finite Element Method; pipe roof; stress and strain analysis; tunnel excavation
Hrčak ID:
139755
URI
Datum izdavanja:
15.6.2015.
Posjeta: 3.325 *