Skoči na glavni sadržaj

Tehnički vjesnik , Vol. 22 No. 3, 2015.

  • Datum izdavanja: 15.06.2015.
  • Objavljen na Hrčku: 12.06.2015.

Sadržaj

Puni tekst

Two-dimensional wind tunnel measurement corrections by the singularity method (str. 557-565)

Taha Ahmed Abdullah, Zlatko Petrović, Zoran Stefanović, Ivan Kostić, Jovan Isaković
Izvorni znanstveni članak


Recycling of corundum particles - two-body abrasive wear of polymeric composites based on waste (str. 567-572)

Petr Valášek, Miroslav Müller, Sergej Hloch
Izvorni znanstveni članak


Aerodynamic investigation of the deformable membrane airfoil with excess length (str. 573-580)

Igor Petrović, Franc Kosel, Viktor Šajn
Izvorni znanstveni članak


Framework proposition and technical guidelines for manufacturers of custom made tools, machinery and special equipment (str. 581-590)

Matic Tepeš, Peter Krajnik, Janez Kopač
Izvorni znanstveni članak


Web-based laboratory for collaborative and concurrent CAD designing, assembling, and practical exercising on distance (str. 591-597)

Zona Kostic, Dusko Radakovic, Dragan Cvetkovic, Aleksandar Jevremovic, Dragan Markovic, Marina Kocareva Ranisavljev
Izvorni znanstveni članak


Different modeling technologies of hydraulic load simulator for thrust vector control actuator (str. 599-606)

Dragan B. Nauparac, Dragan H. Pršić, Marko V. Miloš, Ivana S. Todić
Izvorni znanstveni članak


Research on modelling of spatial dynamic structural mechanics and spatio-temporal evolution of coal mine stopes (str. 607-613)

Zhi-jie Wen, Mikael Rinne, Zhen Song, Zuo-zhen Han, Jin-hao Wen
Izvorni znanstveni članak


Geomagnetic survey on Sinjsko polje repeat station and data reduction using the onsite dIdD variometer (str. 615-622)

Danijel Šugar, András Csontos, Mario Brkić
Izvorni znanstveni članak


Electric power network fractal and its relationship with power system fault (str. 623-628)

Hui Hou, Aihong Tang, Hualiang Fang, Xiaoling Yang, Zhaoyang Dong
Izvorni znanstveni članak


Seismic performance of cross-shaped columns with 500 MPa grade reinforcing steel bars (str. 629-636)

Tie-cheng Wang, Xiao Liu, Hai-long Zhao
Izvorni znanstveni članak


Subsystem partitioning for power system black-start considering restoration reliability (str. 637-642)

Haiping Liang
Izvorni znanstveni članak


Development of an integrated transport system in distribution centres: a FA'WOT analysis (str. 649-658)

Dragan Pamučar, Goran Ćirović, Dragoljub Sekulović
Izvorni znanstveni članak


Determination of visual interest points of graphical user interfaces for tablet newspapers application (str. 659-665)

Darijo Čerepinko, Nikola Mrvac, Marin Milković
Izvorni znanstveni članak


System identification of R/C girder bridges based on field measurements and numerical simulations (str. 667-675)

Damir Zenunovic, Mirsad Topalovic, Radomir Folic
Izvorni znanstveni članak


Research on the representation of granular vertical size grading and numerical simulation method with the typical waste rock site (str. 677-683)

Wang Guang-jin, Kong Xiang-yun, Yang Chun-he
Izvorni znanstveni članak


Comparison of fundamental periods of reinforced shear wall dominant building models with empirical expressions (str. 685-694)

Marijana Hadzima-Nyarko, Dragan Morić, Hrvoje Draganić, Tihomir Štefić
Izvorni znanstveni članak


GIS and DWR based short-term and impending landslide forecasting for Liangshan prefecture (China) (str. 695-702)

Mingtao Ding, Fangqiang Wei
Izvorni znanstveni članak


Stress and strain analysis during the Sleme tunnel excavation (str. 703-709)

Tomislav Hrestak, Antonia Jaguljnjak Lazarević, Lidija Frgić
Izvorni znanstveni članak


Investigation of the mixed-mode fracture in delamination tests: numerical simulations using cohesive zone and partitioning methods (str. 711-719)

Josip Kačmarčik, Pejo Konjatić, Aleksandar Karač
Izvorni znanstveni članak


Materials supply management in construction projects and satisfaction with the quality of structures (str. 721-727)

Biljana Blaževska-Stoilkovska, Tomáš Hanák, Valentina Žileska-Pančovska
Izvorni znanstveni članak


The influence of biomass quality on the stability and sustainability of district heating systems of low-accumulation objects (str. 735-741)

Ante Čikić, Vinko Višnjić, Marko Dunđer
Izvorni znanstveni članak


Intelligent prediction model based on genetic algorithm and support vector machine for evaluation of mining-induced building damage (str. 743-753)

Lang Liu, Xinping Lai, Ki-Il Song, Dezheng Lao
Izvorni znanstveni članak


Investigation on possibilities for biogas production from organic waste on the Croatian island of Krk (str. 755-762)

Viktor Dragičević, Marin Miletić, Branimir Pavković
Izvorni znanstveni članak


Measuring efficiency of football teams by multi-stage DEA model (str. 763-770)

Dijana Petrović Djordjević, Mirko Vujošević, Milan Martić
Izvorni znanstveni članak


Influence of structure of manufacturing system and amount of investment on production costs (str. 771-780)

Edin Cerjaković, Alan Topčić, Džemo Tufekčić, Ivica Veža
Prethodno priopćenje


Defining the criteria to select the wavelet type for the assessment of surface quality (str. 781-784)

Krzysztof Stępień, Wlodzimierz Makiela, Antun Stoić, Ivan Samardžić
Prethodno priopćenje


Methods to detect and prevent fatigue in ageing aircraft structures (str. 793-803)

Željko Marušić, Dajana Bartulović, Branko Maković
Pregledni rad


Mechatronic education at the Faculty of Technical Sciences Novi Sad (str. 805-812)

Gordana Ostojic, Vukica Jovanovic, Drazan Kozak, Zeljko Ivandic, Stevan Stankovski
Pregledni rad


Marketing oriented organizational culture - does it exist in Serbian mechanical industry? (str. 813-819)

Ljiljana Pecić, Milivoj Klarin
Stručni rad


Posjeta: 105.968 *