Skip to the main content

Original scientific paper

https://doi.org/10.17113/ftb.60.04.22.7703

Ispitivanje fenolnog profila i antioksidacijskog učinka meda od metvice (Mentha spp.)

Tomislav Pavlešić orcid id orcid.org/0000-0001-8318-2732 ; University of Rijeka, Faculty of Health Studies, Viktora Cara Emina 5, 51000 Rijeka, Croatia
Sanja Poljak orcid id orcid.org/0000-0002-3500-6467 ; University of Rijeka, Department of Biotechnology, Radmile Matejčić 2, 51000 Rijeka, Croatia
Dijana Mišetić Ostojić orcid id orcid.org/0000-0002-3740-5082 ; Croatian Veterinary Institute, Veterinary Institute Rijeka, Laboratory for Analytical Chemistry and Residues, Podmurvice 29, 51000 Rijeka
Ivana Lučin orcid id orcid.org/0000-0002-5839-3156 ; University of Rijeka, Faculty of Engineering, Vukovarska 58, 51000 Rijeka, Croatia
Christian A. Reynolds orcid id orcid.org/0000-0002-7090-8335 ; University of Rijeka, Department of Biotechnology, Radmile Matejčić 2, 51000 Rijeka, Croatia
Daniela Kalafatovic orcid id orcid.org/0000-0002-9685-1162 ; University of Rijeka, Department of Biotechnology, Radmile Matejčić 2, 51000 Rijeka, Croatia
Lara Saftić Martinović orcid id orcid.org/0000-0001-5637-4659 ; University of Rijeka, Department of Biotechnology, Radmile Matejčić 2, 51000 Rijeka, Croatia


Full text: english pdf 780 Kb

page 509-519

downloads: 271

cite

Download JATS file

Supplements: FTB-60-509-S1.pdf


Abstract

Pozadina istraživanja. Na sastav meda utječu botanički izvor i geografsko podrijetlo nektara iz kojeg je dobiven. Uniflorni medovi postižu veću tržišnu vrijednost od multiflornih zbog svoje specifične arome, koja je rezultat prisustva hlapljivih i fenolnih spojeva.
Eksperimentalni pristup. Svrha je našeg rada bila okarakterizirati fenolni sastav rijetke uniflorne sorte meda – meda od metvice (Mentha spp.). U tu svrhu smo proveli standardne fizikalno-kemijske analize i analizu peludi, odredili ukupne udjele fenola i flavonoida, ispitali antioksidacijsku aktivnost te kvalitativno i kvantitativno ispitali fenolne spojeve u pet uzoraka meda od metvice.
Rezultati i zaključci. Rezultati pokazuju da uzorci meda od metvice imaju velik udjel fenola, izražen u ekvivalentima galne kiseline, od (76,7±0,6) do (90,1±1,1) mg/100 g, te udjel flavonoida, izražen u ekvivalentima kvercetina, od (6,7±0,6) do (12,5±0,8) mg/100 g. Uzorci su također imali snažnu antioksidacijsku aktivnost, izraženu u Trolox ekvivalentima, i to prema metodi DPPH od (33,6±2,8) do (51,3±1,2) mg/100 g, a prema metodi ABTS od (14,4±0,8) do (55,1±2,4) mg/100 g. Kvantitativnim ispitivanjem pomoću spregnutog sustava tekućinske kromatografije i tandemske spektrometrije masa utvrđeno je da su najzastupljeniji fenoli u svim uzorcima bili krizin, apigenin i p-kumarinska kiselina, dok je kvalitativnom analizom pomoću istog sustava utvrđena prisutnost kemferida, diosmetina, akacetina i nekoliko derivata kafeinske kiseline.
Novost i znanstveni doprinos. U istraživanju smo pokazali da med od metvice ima jedinstven fenolni profil, koji pridonosi njegovoj prepoznatljivoj aromi i snažnom antioksidativnom djelovanju. Detaljan opis rijetkih sorti meda omogućava pčelarima veću vidljivost i lakši pristup zahtjevnom tržištu prirodnih proizvoda.

Keywords

med od metvice (Mentha spp.); kemijska karakterizacija meda; fizikalno-kemijska svojstva; melisopalinologija; ispitivanje autentičnosti hrane

Hrčak ID:

292871

URI

https://hrcak.srce.hr/292871

Publication date:

31.1.2023.

Article data in other languages: english

Visits: 1.197 *




INTRODUCTION

Honey is a natural food, consisting mainly of sugars, enzymes, amino acids, organic acids, vitamins, minerals and aromatic substances. As people increasingly consume honey products, standards and norms that guarantee its identity and quality are needed (1). According to the European Union Directive 2001/110/EC (2), honey is defined as a sweet, thick, viscous, liquid or crystallized product produced by honey bees from nectar plants, secretion of living plant parts or secretions of sucking insects.

The composition of honey is influenced by the botanical origin and the geographical area of the nectar from which it is obtained (3). Unifloral honeys reach higher market values ​​than their multifloral counterparts. The reason for this is the specific aroma profiles of unifloral honeys, which result from their unique composition of volatile compounds. In addition to specific organoleptic properties, honey has other components that contribute to its nutritional and medicinal value. Proteins, vitamins, minerals, organic acids and phenolic compounds, the most variable components of honey, contribute predominantly to the strong bioactive effects of this natural food. Therefore, honey is appreciated by consumers, not only in the food industry, but also in the pharmaceutical and cosmetic industries.

Mentha L. is a nectar-producing plant that has about 25 species and hybrids (4). It belongs to the family Lamiaceae, subfamily Nepetoideae, tribe Menthae, which are predominantly characterized as aromatic plants. Due to the presence of numerous aromatic constituents, Mentha spp. essential oils are widely used. Over nine different chemotypes of mint essential oil have been reported (4). Mint leaves have a unique composition of volatile compounds and contain many bioactive phenolic compounds, which is why they are widely used medicinally, especially for the treatment of anorexia, hypertension, ulcerative colitis or as anti-inflammatory, antiemetic, diaphoretic, antispasmodic and analgesic agents (4).

To date, only the volatile composition of mint honey has been analyzed, without detailed analysis of the broader bioactive composition or phenolic profiling (5). We performed pollen analysis, determined the basic physicochemical parameters, total phenolic and flavonoid contents, and antioxidant potential via two different methods: DPPH (2,2-diphenyl-1-picryl-hydrazyl-hydrate) free radical and ABTS (2,2’-azinobis (3-ethylbenzthiazoline-6-acid)) assays. Additionally, we analyzed the phenolic composition of these mint honeys via both qualitative and quantitative liquid chromatography coupled tandem mass spectrometry (LC-MS/MS) (6).

MATERIALS AND METHODS

Samples

Five samples of mint (Mentha spp.) honey were collected directly from producers at different geographical locations in Croatia (Fig. 1). M3 sample was produced in 2019, while the remaining four samples were produced in 2020.

Fig. 1 Locations of mint (Mentha spp.) honey producers in Croatia that provided samples for the study
FTB-60-509-f1

Reagents and materials

Phenolic standards: 2,5-DHBA, 3,4-DHBA, apigenin, caffeic acid, chrysin, kaempferol, luteolin, myricetin, naringenin, p-coumaric acid and quercetin were obtained from Cayman Chemical Company (Ann Arbor, MI, USA). Ethanol (LC-MS purity) was purchased from Sigma-Aldrich, Merck (St. Louis, MO, USA). Methanol (LC-MS purity) and acetonitrile (ACN; LC-MS purity) were purchased from VWR Chemicals BDH® (Radnor, PA, USA). The 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid (ABTS)) were purchased from Alfa Aesar (Haverhill, MA, USA). The (±)-6-hydroxy-2,5,7,8-tetramethyl-chroman-2-carboxylic acid (Trolox) was purchased from Sigma-Aldrich, Merck. Aluminium chloride 6-hydrate was purchased from Gram-Mol (Zagreb, Croatia).

Milli-Q water was obtained using connected Ultrapure Water Systems (GenPure UV-TOC/UF xCAD plus) and Milli-Q water purification system (<0.055 μS/cm, Milli-Q Model Pacific TII 12; Thermo Fisher Scientific, Waltham, MA, USA).

Standard physicochemical parameters

Standard physicochemical parameters determined for the mint honey samples were as follows: water content, electrical conductivity, pH, free acidity, hydroxymethylfurfural (HMF) content, apparent reducing sugars and apparent sucrose content. All methods were performed according to the International Honey Commission (IHC) as follows.

Water content was determined by digital refractometer PAL22S (Atago, Tokyo, Japan) according to the method: ’Determination of water with digital and Abbe refractometers’ (7). Briefly, honey was dissolved in a heating bath at 50 °C. Refractive index was measured at 20 °C after waiting for 6 min for equilibration.

The electrical conductivity of honey was determined according to the method: ’Determination of electrical conductivity’ (8). A mass of 20 g of honey was dissolved in 100 mL distilled water at 20 °C. Electrical conductivity cell was used for measurement.

The pH value was determined according to the method: ’Determination of pH and free acidity by titration to pH=8.3’ (9). For pH measurement pH meter (Mettler Tolledo, Columbus, OH, USA) was used.

Free acidity was determined according to the official IHC method: ’Determination of pH and free acidity” (9). A mass of 10 g of honey sample was dissolved in 75 mL of distilled water. Afterwards, the solution was titrated with 0.1 M sodium hydroxide to pH=8.30.

The HMF content was evaluated using HPLC/DAD system Agilent 1200 (Agilent Technologies, Santa Clara, CA, USA) according to the method for determination of hydroxymethylfurfural by HPLC (10). For mobile phase, V(water):V(methanol)=9:1 was used, flow rate was 1.0 mL/min and injection volume was 20 µL. A mass of 10 g of honey samples was dissolved in 50-mL beaker. The HMF content of the sample was calculated by comparing the corresponding peak areas of the sample and those of the standard solutions.

Apparent reducing sugars were quantified as previously described (11). Briefly, Fehling I solution was prepared by dissolving 69.28 g of copper sulfate pentahydrate in 1000 mL of distilled water and Fehling II solution was prepared by dissolving 346 g sodium potassium tartrate and 100 g sodium hydroxide in 1000 mL of distilled water. Apparent reducing sugars (g invert sugar per 100 g honey) were calculated via titration using methylene blue as an internal indicator and a pure sucrose solution as a standard.

Apparent sucrose content was determined by calculating the difference in total reducing sugar before and after complete inversion via acid hydrolysis (11). The difference in mass fractions of invert sugars was multiplied by 0.95 and expressed as g apparent sucrose per 100 g honey.

Pollen analysis

The Mentha L. species were determined by the shape and size of the pollen grain and the structure and colour of the pollen outer wall (12). Briefly, 10 g of honey sample were dissolved in 20 mL of distilled water, heated in a water bath to 45 °C and centrifuged for 15 min at 1375×g (3500 rpm). The obtained sediment was used to prepare samples for microscopic analysis. Two parallel samples of the same honey were always made (13,14).

Total phenolic content

A modified Folin-Ciocalteu method was used to determine total phenols (15). Briefly, 1 g of honey sample was dissolved in 10 mL of Milli-Q water and homogenized. A volume of 0.1 mL of the obtained solution was mixed with 0.1 mL Folin-Ciocalteu reagent and 0.9 mL Milli-Q water. After 5 min of incubation at room temperature, 0.8 mL of the 7.5% sodium carbonate solution was added and absorbance was measured at 760 nm after 20 min of incubation on a monochromator instrument Infinite M200 PRO (Tecan, Männedorf, Switzerland). Solutions of gallic acid in Milli-Q water in the concentration range of 0-200 mg/L were used to construct the calibration curve. The obtained results were expressed in mg of gallic acid equivalents (GAE) per 100 g honey.

Total flavonoid content

A method according to Sousa et al. (16) was applied to determine total flavonoids. Briefly, honey samples were dissolved in 80% methanol to a concentration of 0.1 g/mL. The sample solutions were mixed with aluminium chloride methanol solution (2 g/100 mL) at a ratio of 1:1 (V/V). After 10 min of incubation at room temperature, absorbance was measured at 415 nm. Quercetin solutions in the concentration range 0-75 mg/L were used to construct the calibration curve. The obtained results were expressed in mg of quercetin equivalents (QE) per 100 g honey.

ABTS method

A modified ABTS method of Sousa et al. (16) was used to study the antioxidant activity of honey). ABTS is a cationic radical formed by the reaction of 7 mM ABTS and 2.4 mM potassium persulfate, after allowing the mixture to stand in the dark for 14 h at room temperature. Samples were prepared by dissolving honey in methanol to a concentration of a 50 mg/mL. Series of Trolox concentrations ranging from 0 to 0.21 mM were used to construct the calibration curve. A volume of 40 μL of Trolox solution or sample solution was mixed with 160 mL of ABTS solution, which was previously diluted in methanol to an absorbance of 0.7. The absorbance values were measured ​​at 734 nm after 7 min of incubation using a monochromator instrument. The results were expressed in mg Trolox equivalents (TE) per 100 g honey.

DPPH method

For the DPPH assay, honey samples were dissolved in methanol to a final concentration of 75 mg/mL. A solution of DPPH radical was prepared by dissolving DPPH in methanol at a concentration of 0.1 mM. A volume of 40 mL of the honey sample and 160 mL of the DPPH solution were mixed, and the absorbance was measured at 517 nm on a monochromator instrument after 60 min of incubation. A solution of Trolox in methanol at a concentration ranging from 0 to 0.21 mM was used to construct the calibration curve. The percentage of free radical inhibition was calculated and expressed in mg TE per 100 g honey.

Solid phase extraction

Phenolic compounds were extracted using solid-phase extraction (SPE) performed according to the modified method of An et. al. (17), for which SPE polypropylene columns CHROMABOND® C18 ec, 6 mL, 500 mg, with polyethylene filter (Macherey-Nagel, Düren, Germany) were used. A mass of 1 g of honey was dissolved in 25 mL of Milli-Q water acidified with 0.1% formic acid (V/V) (pH=2.8) and homogenized. The C18 columns were connected manifold to a vacuum using a vacuum pump. SPE columns were conditioned with 3 mL of water, 3 mL of acidified Milli-Q water, and 3 mL of methanol. Solutions of the honey were then passed through the columns, followed by rinsing the sample with 5 mL of acidified water, 5 mL of Milli-Q and 5 mL of methanol. The methanol fraction was collected and filtered through a 25-mm 0.2 μm polytetrafluoroethylene filter (Agilent Technologies) and analyzed via LC-MS/MS.

LC-MS/MS analysis

For quantitative and qualitative analyses of phenolic compounds in honey samples, Agilent 1260 series HPLC chromatograph (equipped with a degasser, binary pump and autosampler) and column oven coupled to Agilent 6460 triple quadrupole mass spectrometer (equipped with jet stream electrospray source) was used. For chromatographic separation of phenolic compounds, analyses were performed on Purospher STAR RP-18 Hibar HR column (50 mm×2.1 mm, 1.7 µm; Merck, Darmstadt, Germany). Herein we used a modified method from our previous work (18).

Briefly, phenolic standards were diluted in methanol at 15 different concentrations, after which calibration curves were generated and the linearity range was determined. Calibration curves were constructed using linear regression and were not forced to pass through zero. A 1/x statistical weight was applied in order to obtain the most reliable calibration curves. Linearity was determined using the coefficient of determination (R2). The limit of detection (LOD) and limit of quantification (LOQ) were calculated for each standard according to the guidelines of International Conference on Harmonization (ICH) (19). These parameters were calculated to select appropriate concentrations of standard mixtures for the standard addition method of quantification. Optimization parameters for quantitative LC-MS/MS analysis are given inTable S1.

For qualitative analysis of honey extracts, precursor and product ion scan modes were used with the same MS parameters as described above. The fragmentor was set at 80 and/or 135 V and collision energies were adjusted (0−40 V) for each identified compound. Phenolic compounds were identified by comparing precursor and product ions with the data available in the literature and by using the following databases: MassBank (20), mzCloud (21) and ReSpect (22).

Absolute quantification of phenolic compounds by using the standard addition method

When the standard addition method was used, a calibration curve was constructed for each phenolic compound by adding a series of different concentrations (0.1, 0.2 and 0.4 mg/L) of the target compound to each sample prior to SPE. In this way, the calibration curve was prepared in the same honey that was analyzed, which neutralized the negative interference of the matrix with the final results. Different concentrations of the target compound were added to each sample, whereupon increases in LC-MS/MS intensities were measured, resulting from an increase in the amount of analyte in the sample. Linear regression analysis was used on the result points (data) and the analyte concentration in the sample (x-axis) was determined by extrapolating the regression line assuming that y=0.

Statistical data processing

Statistical data processing was performed in MassHunter Qualitative analysis v. B.07.00 (23). Analysis of variance (one-way ANOVA) was conducted using The Data Analysis Toolpak in Excel 2016 (24). The implementation of principal component analysis (PCA) in the Python library Scikit-learn v. 0.20.3 (25) was used.

RESULTS AND DISCUSSION

Melissopalynology or pollen analysis of honey is an important factor in the quality control of unifloral bee products and is included in the national legislation (26). In addition to sensory and physicochemical analysis, it is used to determine and control the botanical and geographical origin of honey, together with the analysis of volatile components. Therefore, we first performed pollen analysis of the obtained mint (Mentha spp.) honey samples to confirm that they are unifloral. According to the rules on the quality of unifloral honey (27), mint honey can be labelled as unifloral honey if the insoluble sediment contains at least 20% pollen grains of Mentha species.Table 1 lists the results of pollen analysis for all samples. Among all samples, the highest Mentha spp. pollen content was observed in samples M2 and M5.

Table 1 Standard physicochemical parameters determined for the mint (Mentha spp.) honey samples
          Sample          w(water)/%          σ/(mS/cm)          pH          b(free acid)/(mmol/1000 g)          w(HMF)/(mg/kg)          w(reducing sugar)/(g/100 g)          w(sucrose)/(g/100 g)w(pollen)/%
          M1          19.1          0.77          3.83          37          <1          68.77          2.53          23
          M2          19.8          0.66          3.63          37          3.4          67.57          2.43          28
          M3          16.8          0.75          3.95          35          9.1          67.11          4.59          21
          M4          17.4          0.80          3.65          37          10.3          74.29          2.95          25
          M5          19.6          0.80          3.55          38          6.8          70.52          2.35          28

σ=electrical conductivity

European Union Directive 2001/110/EC (2) set the thresholds for all analyzed standard physicochemical parameters, where water content should be below 20%, electrical conductivity below 0.80 mS/cm, free acidity below 50 mmol/kg, hydroxymethylfurfural (HMF) content below 40 mg/kg, reducing sugars above 60 and sucrose content below 5 g/100 g . All analyzed honey samples were in compliance with these standards (Table 1).

Mint honey samples showed high total phenolic content, expressed in gallic acid equivalents (GAE), ranging from (76.7±0.6) to (90.1±1.1) mg100 g (Table 2). Pauliuc et al. (28) reported significantly lower total phenolic content in peppermint (Mentha piperita) honey, with mean value, expressed as GAE, of (23.7±4.37) mg/100 g . However, they reported interestingly high total flavonoid content, expressed as quercetin equivalents (QE), of (25.7±10.55) mg/100 g, exceeding the total amount of phenols. Our results showed that mint honey flavonoid content, expressed as QE, ranged from (6.7±0.6) to (12.5±0.8) mg/100 g (Table 2). Our results of the DPPH antioxidant activity were not in line with Pauliuc et al. (28), who reported (74.03±5.84) % inhibition, while the inhibition in our samples ranged from (33.6±2.8) to (51.3±1.2) % (Table 2). Samples M2 and M5, with the highest mint content (28%), showed similar antioxidant activity when analyzed with DPPH assay, whereas ABTS assay showed some differences. This can be the result of different affinities of the assays against other compounds that are present in the honey. Antioxidant activity is also affected by components in the honey that come from other plant species and can be up to 80% in different proportions in honey samples. Therefore, it may happen that mint honey samples have similar antioxidant activity, but at the same time a large difference in the amount of mint pollen grains. In addition to the above, we must not neglect the large number of different Mentha species that also potentially affect the different ratios and types of bioactive components.

Table 2 Total phenolic content, total flavonoid content and antioxidant activity measured by DPPH and ABTS assays of mint (Mentha spp.) honey
          SampleTotal phenols
          w(GAE)/(mg/100 g)
Total flavonoids
          w(QE)/(mg/100 g)
DPPH
          w(TE)/(mg/100 g)
ABTS
          w(TE)/(mg/100 g)
          M1          89.8±0.2          11.6±0.4          40.9±1.9          38.4±0.6
          M2          78.4±1.3          10.6±0.5          42.7±1.9          30.4±0.7
          M3          90.1±1.1          12.5±0.8          51.3±1.2          44.8±1.9
          M4          78.4±0.3          7.8±0.2          33.6±2.8          14.4±0.8
          M5          76.7±0.6          6.7±0.6          36.7±2.0          55.1±2.4

Results are expressed as mean value±standard deviation (S.D.), N=3. The results of one-way ANOVA showed significant differences in all analyzed parameters (p<0.0001). Some samples vary greatly from others, so these results were removed from further analysis

To test the variability among analyzed samples, we performed PCA analysis (Fig 2). The PCA projection of the total phenolic content, total flavonoid content, DPPH and ABTS antioxidant activities (Figs. 2a and 2b) indicated a high degree of heterogeneity of these variables among mint honey samples. The first two components (PC1 and PC2) describe 91.7% of total variability. Analyzed parameters enabled grouping of samples M1 and M3 on the positive side of PC1, while the rest of the samples were spread on the negative side. These samples had the lowest mint pollen content and antioxidant capacity, but the highest phenolic content. Therefore, it could be presumed that the presence of mint pollen results in honey with high content of phenols, but low antioxidant capacity, meaning that mint honeys have other components with antioxidant power. Since mint honey can contain as little as 20% of its pollen, it raises a question from what species are other honey components that also influence the analyzed parameters. Indeed, the total variability among all analyzed samples may result from the presence of components derived from plants other than Mentha species, or from the presence of different Mentha species.

Fig. 2 Distribution of elements (variables and samples respectively) in principal component 1 (PC1) vs principal component 2 (PC2) plot when: a and b) total phenolic content, total flavonoid content, DPPH and ABTS antioxidant activities, and c and d) quantified phenolic compounds (LC-MS/MS) in mint honey samples were used as variables
FTB-60-509-f2

To get a deeper insight into the antioxidant content of the mint honey, we performed a detailed quantitative LC-MS/MS analysis of major phenolic compounds. A major challenge for quantitative analysis of individual phenolic compounds in honey is the matrix effect, which is difficult to overcome given the lack of commercially available isotope-labelled internal standards. Due to its construction, LC-MS/MS analysis is sensitive to the matrix effect, which can affect the sensitivity and selectivity, reducing the accuracy, precision and robustness of the method itself. For this reason, we used the standard addition method. This method effectively compensates for low recovery and matrix effects. It is suitable for use when the matrix effect is strong, and no matrix standard is available to construct the calibration curve (external matrix matched calibration).

Quantitative analysis of phenolic compounds revealed that the most abundant flavonoids in mint honey are chrysin and apigenin at mass fractions ranging from (0.112±0.005) to (0.51±0.07) mg/100 g and from (0.1065±0.0002) to (0.64±0.01) mg/100 g, respectively (Table 3). Among the analyzed phenolic acids, p-coumaric acid was the most abundant with mass fractions up to (0.8±0.2) mg/100g. Pauliuc et al. (28) reported similar results for p-coumaric acid in honey of (0.61±0.53) mg/100 g. In addition, similar results were observed for caffeic acid and quercetin, while we observed significantly lower myricetin mass fraction ((0.0004±0.0004)–(0.0058±0.0001) mg/100 g). However, in our method a strong matrix effect of honey was observed, especially for myricetin, which had a falsely high signal in the MS spectrum and consequently a falsely high concentration. Therefore, these results should not be compared to those obtained using the relative quantification method. This indicates the advantage of using internal standards or the standard addition method.

Table 3 Mass fractions of specific phenolic acids and flavonoids in mint (Mentha spp.) honey samples obtained by LC-QQQ method
          Phenol          w/(mg/100 g)
          M1          M2          M3          M4          M5
          2,5-DHBA          <LOQ          <LOQ          0.045±0.008          0.014±0.002          0.0133±0.0008
          3,4-DHBA          0.178±0.001          0.07230.002          0.6±0.2          0.3±0.1          NA
          Apigenin          0.24±0.02          0.64±0.01          0.109±0.001          0.18±0.01          0.1065±0.0002
          Caffeic acid          0.191±0.008          0.13±0.02          0.15±0.05          0.115±0.009          0.277±0.208
          Chrysin          0.5±0.1          0.29±0.02          0.112±0.005          0.51±0.07          0.2506±0.0073
          Kaempferol          0.059±0.002          0.072±0.003          0.0337±0.0005          0.07±0.02          0.0348±0.0003
          Luteolin          0.0164±0.0003          0.0108±0.0002          0.0142±0.0004          0.0096±0.0002          0.018±0.001
          Myricetin          0.0042±0.0001          0.002±0.002          0.0017±0.0005          0.0004±0.0004          0.0058±0.0001
          Naringenin          0.0314±0.0002          0.0315±0.0000          0.01±0.02          0.0254±0.0002          0.0255±0.0006
          p-coumaric acid          0.53±0.04          0.37±0.02          0.7±0.2          0.8±0.2          0.34±0.02
          Quercetin          0.1015±0.0006          0.1279±0.0001          0.0580±0.0004          0.0960±0.0004          0.15±0.02

Results are expressed as mean value±standard deviation (S.D.), N=2. LOQ=limit of quantification, DHBA=dihydroxybenzoic acid, NA=not applicable

Figs. 2c and 2d show the PCA projection of quantitative LC-MS/MS analysis of phenolic compounds where all analyzed phenolic compounds were used as variables. The first two components describe 85.3% of the total variability. This high variability among all mint honey samples indicates that there are some differences that may be attributed to the variability in the individual Mentha spp. or the presence of additional plant species in the honey samples that may affect phenolic composition.

Finally, to detect the presence of other phenols in mint honey samples that were not included in the quantitative analysis, we performed MS screening with the same LC-MS/MS instrument. Results of this qualitative analysis are shown inTable 4. In total, 21 compounds were detected in all samples, among which 18 were identified. The m/z values of unidentified compounds that were present in all honey samples were 550.9(-), 553.0(-) and 771.2(+). Since there are no previous reports of phenolic profiling of mint honey, we compared our findings with the phenolic profiles of different plant parts of Mentha species. Mimica-Dukic and Bozin (4) described a large number of flavonoids and glycosides in Mentha species. Similar results were observed by Cirlini et al. (29) in their study of Mentha spicata (L.) extracts, who identified several salvianolic acids, rosmarinic acid derivatives and a large number of flavonoid glycosides. In our mint honey samples, we identified luteolin glycoside in M1, M2 and M5, and quercetin rutinoside in M1. Among the flavonoid aglycones, we found pinobanksin, diosmetin, galangin, apigenin, chrysin, kaempferol, luteolin, myricetin, naringenin and quercetin to be present in all samples (Table 3 andTable 4). The phenolic profiles of Tunisian native Mentha rotundifolia L. Huds were confirmed to contain 17 different phenolic compounds, among which salvianolic acids were most prominent (30). Interestingly, in our mint honey samples, we detected salvianolic acid G only in sample M2. Ćavar Zeljković et al. (31) reviewed the most abundant phenolic components in different types of Mentha species and at different geographical locations in Europe. They reported that the dominant phenolic compounds in Mentha longifolia species in Croatia are rosmarinic and chlorogenic acids. Indeed, we confirmed the presence of chlorogenic acid in four out of five mint honeys. Along with chlorogenic acid, we also observed the presence of caffeic acid and luteolin in all samples, which are usually found in the Mentha aquatica and Mentha spicata species (31). In addition, lithospermic acid, a compound specific for Mentha longifolia, Mentha × piperita and Mentha × villosa species, was detected in samples M1, M4 and M5.

Table 4 Identified compounds in mint (Mentha spp.) honey by LC-MS/MS method
          Tentative identification          tR          Precursor mass (m/z)          Fragmentation pattern (m/z)          Molecular formula          Presence in analyzed honey samples          Level of confirmation*
         M1          M2          M3          M4          M5
          Salvianolic acid G          4.5          417.0 (-)219.0 [C11H7O5]-
          237.0 [C11H9O6]-
          C20H18O10          -          +          -          -          -          2
          Unknown          4.6          354.0 (-)279.1
264.8
          235.0
          /          +          -          +          +          +          3
          Agathadiol          4.9          307.0 (+)271.0
243.0
231.0
215.0
193.0
          173.0
C20H34O2          +          +          +          +          +          2
          pHBA          5.2          136.8 (-)92.7 [C6H5O]-
          64.8 [C4HO]-
          C7H6O3          +          +          +          +          +          1
          2,5-DHBA (gentisic acid)          5.2          152.8 (-)108.8 [C6H5O2]-
          52.9 [C3HO]-
          C7H6O4          +          +          +          +          +          1
          Unknown          5.3          667.0 (-)343.0
322.7
          178.8
          /          +          -          -          +          +          3
          Unknown          5.3          550.9 (-)504.9
322.7
          178.8
          /          +          +          +          +          +          3
          Unknown          5.4          553.0 (-)506.9
322.9
          178.8
          /          +          +          +          +          +          3
          Dimethyl caffeic acid          5.8          209.0 (-)190.7 [C10H7O4]-
          162.9 [C10H11O2]-
          C11H12O4          -          -          -          -          +          2
          Chlorogenic acid          5.9          359.0 (-)          191.0 [C7H10O6]-          C16H18O9          +          -          +          +          +          1
          Unknown          6          388.9 (-)253.1
223.0
          180.9
          /          -          +          +          +          +          3
          Rosmarinic acid          6          359.0 (-)197.0 [C9H9O5]-
179.0 [C9H7O4]-
161.0 [C9H5O3]-
135.0 [C7H3O3]-
          121.0 [C7H5O2]-
          C18H16O8          -          -          +          -          -          2
          Isocupressic acid          6.1          321.0 (+)257.0
          247.0
          C20H32O3          -          -          +          -          -          2
          Quercetin rutinoside          6.5          609.0 (-)301.0 [C15H7O7]-
271.0 [C14H7O6]-
          151.0 [C7H3O4]-
          C27H10O16          +          -          -          -          -          2
          Syringic acid          6.7          197.0 (-)181.8
166.9
          122.6
C9H10O5          +          +          +          +          +          1
          Lithospermic acid          7          537.0 (-)493.0
356.0
          295.0
          C27H22O12          +          -          -          +          +          2
          Ferulic acid          7.2          192.9 (-)177.9 [M-H2O]-
149.0 [C9H9O2]-
          134.0 [C8H4O2]-
C10H10O4          +          +          +          +          +          1
          Luteolin glucoside          7.3          449.1 (+)          287.0 [C15H10O6]-          C21H20O11          +          +          -          -          +          1
          Narirutin (naringenin rutinoside)          7.5          581.0 (+)545.0 [C27H29O12]+
435.0 [C21H23O10]+
419.0
315.0
          273.0 [C15H13O5]+
          C27H32O14          -          +          -          -          -          2
          Unknown          7.7          771.2 (+)609.0
462.9
          600.6
          /          +          +          +          +          +          3
          Azelaic acid          8.4          287.0 (-)          125.0 [C8H13O]-          C9H16O4          +          -          -          -          +          2
          p-coumaric prenyl ester          8.5          233.0 (-)146.0 [C9H5O2]-
118.8 [C9H7O3-CO2]-
          92.9
          C14H16O3          +          +          -          +          +          2
          Quercitrin          8.5          447.0 (-)301.0 [C15H10O7]-
300.0 [C15H9O7]-
271.0 [C14H7O6]-
          151.0 [C7H3O4]-
          C21H20O11          +          -          -          +          +          2
          Dimethyl caffeic acid          8.6          209.0 (+)190.7 [C11H11O3]+
162.9 [C9H7O3]+
133.0 [C9H9O]+
          118.9 [C7H3O2]+
          C9H8O4          +          +          +          +          +          2
          Abscisic acid          8.9          263.0 (-)219.1 [C14H19O2]-
203.8 [C13H15O2]-
          152.9 [C9H13O2]-
          C15H20O4          +          +          +          +          +          2
          Sebacic acid          9.2          200.9 (-)182.8 [C10H15O3]-
138.8 [C9H15O]-
          110.9 [C8H15]-
          C10H18O4          +          +          +          +          +          2
          Pinobanksin methyl ether          9.6          285.0 (-)252.9 [C15H9O4]-
240.9
239.0
226.9 [C14H11O3]-
          223.9
          C16H14O5          +          +          -          +          +          2
          Sakuranetin          9.6          284.9 (-)164.9 [C8H5O4]
136.0
118.9 [C7H3O2]-
108.0
          92.8 [C6H5O]-
          C16H14O5          -          +          -          +          +          1
          Quercetin methyl ether          10          315.0 (-)300.0 [M-CH3]
270.7 [M-CH3-CO]
          255.0
          C16H21O7          +          +          +          +          +          2
          Tectochrysin          10.5          267.0 (-)252.0
          224.0 [C10H9O6]-
          C16H12O4          +          +          +          +          +          1
          Pinobanksin          10.8          271.0 (-)252.9 [C15H9O4]-
225.0 [C14H9O3]-
196.6 [C13H9O2]-
          160.7 [C10H9O2]-
          C15H12O5          +          +          +          +          +          1
          Diosmetin          10.9          301.0 (+)285.9 [C15H9O6]+
257.9 [C14H9O5]+
          228.7 [C13H9O4]+
          C16H12O6          +          +          +          +          +          1
          Kaempferide          11          299.0 (-)284.0 [C15H8O6]
255.0
          227.0 [C13H7O4]-
C16H12O6          +          +          +          +          +          2
          Artepilin C          11          299.0 (-)255.0
          151.0
C19H24O3          +          -          -          +          +          2
          Quercetin dimethyl ether          11          329.0 (-)313.7 [M-CH3]-
298.7 [M-2CH3]-
          270.8 [M-2CH3-CO]-
          C17H14O7          -          +          +          +          +          2
          Rhamnetin          11.3          314.9 (-)165.0 [C8H5O4]-
          121.0
          C16H12O7          -          +          +          --          +          1
          Caffeic acid benzyl ether          11.4          269.0 (-)178.0 [C9H7O4]-
161.0 [C9H5O3]-
          134.0 [C9H7O4-CO2]-
          C16H14O4          +          +          +          -          +          2
          Caffeic acid prenyl ester (prenyl caffeate)          11.4          247.0 (-)246.7
178.8 [C9H7O4]-
          160.8 [C9H5O3]-
          135.0 [C9H7O4-CO2]-
          C14H16O4          +          +          +          +          +          2
          Pinocembrin          11.5          254.8 (-)212.9 [C13H9O3]-
          150.8 [C7H3O4]-
          C15H12O4          +          +          +          -          +          1
          Pinostrombin          11.5          269.0 (-)167.1 [C8H7O4]-
          130.9 [C9H7O]-
          C16H14O4          +          +          -          -          -          2
          Pinobanksin-O-acetate          11.5          313.0 (-)270.1 [C15H12O5]-
252.9 [C15H9O4]-
          114.5
          C17H14O6          -          -          -          +          +          2
          Caffeic acid phenylethyl ether (CAPE)          11.5          283.0 (-)          179.0 [C9H7O4]-
          135.0 [C9H7O4-CO2]-
          C17H16O4          +          +          +          +          +          2
          Galangin          11.6          268.9 (-)252.0
168.9
          142.9
          C15H10O5          +          +          +          +          +          1
          Acacetin          11.7          283.0 (-)          268.0          C16H12O5          +          +          +          +          +          2
          p-coumaric acid cinnamyl ester          12.5          281.0 (+)241.0
192.6
162.1
147.0 [C9H7O2]+
118.6 [C8H7O]+
          106.6
C18H16O3          +          +          +          +          +          2

*Level of confirmation: 1=standard, 2=literature or databases, 3=unknown. pHBA=p-hydroxybenzoic acid, DHBA=dihydroxybenzoic acid

The obtained results are the basis for further characterization of mint honey, which should include more samples from various geographical regions and containing pollen from different Mentha species. More detailed analysis (e.g. genetic analysis) of Mentha pollen in the honey samples may also be beneficial. Finally, additional comparative analysis of mint honey with other types of honey is necessary to confirm the presence of Mentha-specific honey constituents.

CONCLUSIONS

In this paper, we conducted a detailed qualitative and quantitative analyses of phenols from mint (Mentha spp.) honey. In combination with the previously published results on volatile components, we have taken an additional step towards the full detailed characterization of this rare bee product. Here, we showed that mint honey has a unique phenolic fingerprint and high content of individual phenols. Indeed, spectrophotometric analysis showed high phenolic mass fraction, expressed as gallic acid equivalents, up to (90.1±1.1) mg/100 g that was accompanied by strong antioxidant activity measured with DPPH and ABTS methods. Quantitative LC-MS/MS analysis confirmed high mass fractions of chrysin, apigenin and quercetin, flavonoids with known strong biological activity. In addition, untargeted analysis indicates that mint honey can be a valuable source of rare phenolic compounds. Indeed, we confirmed the presence of several flavonoid glycosides (quercetin rutinoside, luteolin glucoside, narirutin, quercitrin, etc.), abscisic and sebacic acid, as well as the acacetin, galangin, pinostrombin and pinocembrin in all analyzed samples. Overall, our research has added valuable insight into the benefits of this rare bee honey and laid the foundation for greater product recognition in the food industry.

Notes

[1] Financial disclosure FUNDING

We gratefully acknowledge the project ’Analysis of rare unifloral honeys in Croatia’, funded by the Paying Agency for Agriculture, Fisheries and Rural Development (PAAFRD). We are also grateful for the project ’Research infrastructure for campus-based laboratories at the University of Rijeka’, co-financed by European Regional Development Fund (ERDF).

[2] Conflicts of interest CONFLICT OF INTEREST

The authors have no conflict of interest to declare.

SUPPLEMENTARY MATERIALS

Supplementary materials are available atwww.ftb.com.hr.

REFERENCES

1 

da Silva PM, Gauche C, Gonzaga LV, Costa ACO, Fett R. Honey: Chemical composition, stability and authenticity. Food Chem. 2016;196:309–23. https://doi.org/10.1016/j.foodchem.2015.09.051 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/26593496

2 

Council Directive. 2001/110/EC of 20 December 2001 relating to honey. OJ L. 2002;10:47-52. Available from:https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32001L0110&from=EN.

3 

Kaškonienė V, Venskutonis PR. Floral markers in honey of various botanical and geographic origins: A review. Compr Rev Food Sci Food Saf. 2010;9(6):620–34. https://doi.org/10.1111/j.1541-4337.2010.00130.x PubMed: http://www.ncbi.nlm.nih.gov/pubmed/33467823

4 

Mimica-Dukic N, Bozin B. Mentha L. species (Lamiaceae) as promising sources of bioactive secondary metabolites. Curr Pharm Des. 2008;14(29):3141–50. https://doi.org/10.2174/138161208786404245 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/19075696

5 

Jerković I, Hegić G, Marijanović Z, Bubalo D. Organic extractives from Mentha spp. honey and the bee-stomach: Methyl syringate, vomifoliol, terpenediol I, hotrienol and other compounds. Molecules. 2010;15(4):2911–24. https://doi.org/10.3390/molecules15042911 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/20428087

6 

Pavlešić T, Poljak S, Reynolds C, Šustić A, Saftić Martinović L. Phenolic composition and antioxidant activity of mint (Mentha spp.) honey. In: Babić J, Šubarić D, Jašić M, editors. Book of abstracts of the 13 International Scientific and Professional Conference WITH FOOD TO HEALTH; 2021, September 16-17; Osijek, Croatia; University of Osijek, Faculty of Food Technology and University of Tuzla, Faculty of Technology; 2021. p. 131.

7 

Determination of water with digital and Abbe refractometers. Bern, Switzerland: Harmonised methods of the International Honey Commission (IHC); 2009. pp. 13-15. Available from:https://www.ihc-platform.net/ihcmethods2009.pdf.

8 

Determination of electrical conductivity. Bern, Switzerland: Harmonised methods of the International Honey Commission (IHC); 2009. pp. 16-18. Available from:https://www.ihc-platform.net/ihcmethods2009.pdf.

9 

Determination of pH and free acidity. Bern, Switzerland: Harmonised methods of the International Honey Commission (IHC); 2009. pp. 21-25. Available from:https://www.ihc-platform.net/ihcmethods2009.pdf.

10 

Determination of hydroxymethylfurfural by HPLC. Bern, Switzerland: Harmonised methods of the International Honey Commission (IHC); 2009. pp. 26-28. Available from:https://www.ihc-platform.net/ihcmethods2009.pdf.

11 

Determination of apparent reducing sugars and apparent sucrose. Bern, Switzerland: Harmonised methods of the International Honey Commission (IHC); 2009. pp. 42-45. Available from:https://www.ihc-platform.net/ihcmethods2009.pdf.

12 

Von Der Ohe W, Oddo LP, Piana ML, Morlot M, Martin P. Harmonized methods of melissopalynology. Apidologie (Celle). 2004;35 Suppl. 1:S18–25. https://doi.org/10.1051/apido:2004050

13 

Pospiech M, Javůrková Z, Hrabec P, Štarha P, Ljasovská S, Bednář J, et al. Identification of pollen taxa by different microscopy techniques. PLoS One. 2021;16(9):e0256808. https://doi.org/10.1371/journal.pone.0256808 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/34469471

14 

Rašić S, Štefanić E, Antunović S, Jović J, Kristek S. Pollen analysis of honey from north-eastern Croatia. Agriculture. 2018;24(2):43–9. https://doi.org/10.18047/poljo.24.2.6

15 

Alvarez-Suarez JM, Tulipani S, Romandini S, Vidal A, Battino M. Methodological aspects about determination of phenolic compounds and in vitro evaluation of antioxidant capacity in the honey: A review. Curr Anal Chem. 2009;5(4):293–302. https://doi.org/10.2174/157341109789077768

16 

Sousa JM, de Souza EL, Marques G, Meireles B, de Magalhães Cordeiro ÂT, Gullón B, et al. Polyphenolic profile and antioxidant and antibacterial activities of monofloral honeys produced by Meliponini in the Brazilian semiarid region. Food Res Int. 2016;84:61–8. https://doi.org/10.1016/j.foodres.2016.03.012

17 

An CY, Hossain MM, Alam F, Islam MA, Khalil MI, Alam N, et al. Efficiency of polyphenol extraction from artificial honey using C18 cartridges and Amberlite® XAD-2 resin: A comparative study. J Chem. 2016;2016:8356739. https://doi.org/10.1155/2016/8356739

18 

Saftić L, Peršurić Ž, Fornal E, Pavlešić T, Kraljević Pavelić S. Targeted and untargeted LC-MS polyphenolic profiling and chemometric analysis of propolis from different regions of Croatia. J Pharm Biomed Anal. 2019;165:162–72. https://doi.org/10.1016/j.jpba.2018.11.061 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/30551071

19 

Validation of analytical procedures: Text and methodology Q2(R1). ICH harmonised tripartite guideline. International conference on harmonisation of technical requirements for registration of pharmaceuticals for human use. Geneva, Switzerland: The International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH); 2005. Available from:https://database.ich.org/sites/default/files/Q2%28R1%29%20Guideline.pdf.

20 

MassBank, v. 2021.03, MassBank Europe Mass Spectral DataBase, Leibniz Institute of Plant Biochemistry, Halle/Saale, Germany; 2021. Available from:https://massbank.eu/MassBank/.

21 

mzCloud – Advanced Mass Spectral Database, HighChem LLC, Bratislava, Slovakia; 2013-2022. Available from:https://www.mzcloud.org/.

22 

ReSpect. ReSpect for Phytochemicals, RIKEN Center for Sustainable Resource Science, Metabolomics Research Group, LC-MS Branch, Wakō, Japan. Available from:http://spectra.psc.riken.jp/menta.cgi/respect/search/fragment?page=1.

23 

MassHunter Quantitative Analysis software, v. B.07.00, Agilent Technologies Inc, Santa Clara, CA, USA; 2014.

24 

Excel M. Microsoft Corporation, Redmond, WA, USA; 2016. Available from:https://office.microsoft.com/excel.

25 

Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, et al. Scikit-learn: Machine learning in Python. J Mach Learn Res. 2011;12:2825–30.

26 

Ordinance on the quality of honey NN 53/2015. Zagreb, Croatia: Official Gazette of the Republic of Croatia; 2015. Available from:https://narodne-novine.nn.hr/clanci/sluzbeni/2015_05_53_1029.html (in Croatian).

27 

Ordinance on the quality of unifloral honey NN 122/2009. Zagreb, Croatia: Official Gazette of the Republic of Croatia; 2009. Available from:https://narodne-novine.nn.hr/clanci/sluzbeni/2009_10_122_3018.html (in Croatian).

28 

Pauliuc D, Dranca F, Oroian M. Antioxidant activity, total phenolic content, individual phenolics and physicochemical parameters suitability for Romanian honey authentication. Foods. 2020;9(3):306. https://doi.org/10.3390/foods9030306 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/32182719

29 

Cirlini M, Mena P, Tassotti M, Herrlinger KA, Nieman KM, Dall’Asta C, et al. Phenolic and volatile composition of a dry spearmint (Mentha spicata L.) extract. Molecules. 2016;21(8):1007. https://doi.org/10.3390/molecules21081007 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/27527127

30 

Ben Haj Yahia I, Zaouali Y, Ciavatta ML, Ligresti A, Jaouadi R, Boussaid M, et al. Polyphenolic profiling, quantitative assessment and biological activities of Tunisian native Mentha rotundifolia (L.) Huds. Molecules. 2019;24(13):2351. https://doi.org/10.3390/molecules24132351 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/31247911

31 

Ćavar Zeljković S, Šišková J, Komzáková K, De Diego N, Kaffková K, Tarkowski P. Phenolic compounds and biological activity of selected Mentha species. Plants. 2021;10(3):550. https://doi.org/10.3390/plants10030550 PubMed: http://www.ncbi.nlm.nih.gov/pubmed/33804017

Appendices

Table S1 MS/MS standard optimization parameters
          Standard          Polarity          Precursor (m/z)          Fragmentor/V          Product ions (m/z)          CE/V          tR/min          a          b          R2          Linearity range/(µg/mL)          LOD/(µg/mL)          LOQ/(µg/mL)
          2,5-DHBA          -          152.8          100          107.8*          20          5.20          26643.4743          -13.9153          0.9969          0.01-2.5          0.0017          0.0052
          52.9          20
          3,4-DHBA          -          152.8          90          108.8          10          4.24          28778.8402          2.1451          0.9954          0.01-2.5          0.0002          0.0007
          90.6          26
          80.8          20
          Apigenin          -          268.7          160          224.5          20          10.72          4448.7078          5.0376          0.9974          0.01-1.0          0.0037          0.0113
          148.5          24
          116.6          38
          Caffeic acid          -          178.8          80          137.7          12          5.79          187.5139          5.7729          0.9929          0.01-1.0          0.1016          0.3079
          106.4          24
          Chrysin          -          252.7          180          142.7          26          11.44          2319.0652          30.9715          0.9983          0.01-1.0          0.0441          0.1336
          118.6          30
          106.5          24
          Kaempferol          -          284.7          190          238.5          28          10.86          1125.8622          7.0511          0.9951          0.01-1.0          0.0207          0.0626
          184.4          28
          170.5          28
          Luteolin          -          284.7          200          242.8          20          9.45          30263.2753          68.3527          0.9962          0.01-1.0          0.0075          0.0226
          198.8          24
          150.7          24
          132.7          36
          Myricetin          -          316.7          160          270.7          26          8.19          6673.6056          727.8511          0.9927          0.01-2.5          0.3599          1.0906
          150.7          24
          Naringenin          -          270.8          120          150.6          14          10.60          24343.7076          428.4255          0.9903          0.01-0.5          0.0581          0.1760
          118.8          26
          p-coumaric acid          -          162.9          90          118.8          10          6.67          32493.0182          40.2011          0.9972          0.01-2.5          0.0041          0.0124
          92.6          34
          65.7          44
          pHBA          -          136.8          80          92.7          12          5.18          6304.6523          9.7256          0.9922          0.01-1.0          0.0051          0.0154
          Quercetin          -          300.8          170          178.5          14          9.50          7330.6106          -28.6147          0.9959          0.01-1.0          0.0129          0.0390
          150.6          20

*Quantifier ions are underlined. DHBA=dihydroxybenzoic acid, pHBA=4-hydroxybenzoic acid, CE=collision energy, tR=retention time, a=slope and b=intercept (y=ax+b), LOD=limit of detection, LOQ=limit of quantification


This display is generated from NISO JATS XML with jats-html.xsl. The XSLT engine is libxslt.