Skoči na glavni sadržaj

Tehnički vjesnik , Vol. 27 No. 2, 2020.

  • Datum izdavanja: 15.04.2020.
  • Objavljen na Hrčku: 15.04.2020.

Sadržaj

Puni tekst

Influence of Cutting Speed on the Hob Wear in Hobbing with the Minimum Quantity Lubrication (str. 341-345)

Wojciech Stachurski, Bogdan Kruszyński
Izvorni znanstveni članak


Operational Aspects of Vertical Navigation during the Approach Phase of Flight: CDA vs. Conventional Step-Down Approach (str. 346-352)

Petar Andraši*, Doris Novak, Antonio Ratković
Izvorni znanstveni članak


Studentized Extreme Eigenvalue Based Double Threshold Spectrum Sensing Under Noise Uncertainty (str. 353-357)

Cebrail Çiflikli, Fatih Yavuz Ilgin
Izvorni znanstveni članak


Polynomial Based Dynamic Key Management for Secure Cluster Communication in Wireless Mobile Sensor Network (str. 358-367)

Eid Rehman, Muhammad Sher, Syed Husnain Abass Naqvi, Anwar Ghani
Izvorni znanstveni članak


Off-line Deduplication Method for Solid-State Disk Based on Hot and Cold Data (str. 368-373)

Xin Ye, Zhengjun Zhai, Xiaochang Li
Izvorni znanstveni članak


Comparative Analysis on Elastic-plastic Analytical Methods for Tunnel Surrounding Rocks (str. 374-381)

Chuanqi Zhu, Xingang Niu, Huaifu Liu, Haifeng Ma, Zhenhua Jiao
Izvorni znanstveni članak


A Data-Driven Condition Monitoring of Product Quality Analysis System Based on RS and AHP (str. 382-390)

Jihong Pang, Ruiting Wang, Quan Xiao, Feifei Qin
Izvorni znanstveni članak


Numerical Simulation of Jet Pipe Servo Valve (str. 391-398)

Ying Zhang, Junshuo Chen
Izvorni znanstveni članak


Concept of Socio-Cyber-Physical Work Systems for Industry 4.0 (str. 399-410)

Elvis Hozdić, Peter Butala
Izvorni znanstveni članak


A Fibrational Method of Indexed Coinductive Data Types (str. 411-422)

Decheng Miao, Chaoyang Wang, Xinsheng Liu, Yonglin Liang
Izvorni znanstveni članak


Thermal Performance of Heat Pipe Array in Battery Thermal Management (str. 423-428)

Chaoyi Wan
Izvorni znanstveni članak


Do Braille Cells Influence Legibility of Texts for the Sighted? (str. 429-434)

Klementina Možina, Igor Majnarić, Dorotea Kovačević
Izvorni znanstveni članak


Research on Fault Diagnosis Based on Dynamic causality diagram and Fuzzy Reasoning Fusion Method (str. 435-443)

Yinkai Wang, Hongguo Chen, Zhiming Zhan
Izvorni znanstveni članak


Study of Risk Evaluation for Complex Projects under BIM and IPD Collaborative Pattern Based on Neighborhood Rough Sets (str. 444-449)

Weibing Chen, Junwu Wang, Chengfu Wang
Izvorni znanstveni članak


Synchronized Measurements Processing Methodology as a Tool for Monitoring Power System Oscillations (str. 450-457)

Srđan Skok, Dunja Srpak, Ladislav Havaš, Veljko Kondić
Izvorni znanstveni članak


Numerical Simulation Analysis of Water Injection Seepage Law in Micro Porous Structure of Coal (str. 458-466)

Gang Zhou, Lei Qiu, Wen-Zheng Zhang, Jiao Xue, Ming-Guang Zhang
Izvorni znanstveni članak


A New Approach to Ergonomic Physical Risk Evaluation in Multi-Purpose Workplaces (str. 467-474)

Andrzej Marek Lasota
Izvorni znanstveni članak


Mathematical Modeling of Heat Transfer of Liquefied Natural Gas Engines (str. 475-479)

Milica Nikodijevic, Radovan Petrovic, Sergey V. Bochkarev, Nenad Todic, Ivica Stankovic
Izvorni znanstveni članak


A Mathematical Model of Organizing the Developmental Instruction in the System of Professional Education (str. 480-488)

Artem Obukhov, Denis Dedov, Mikhail Krasnyanskiy, Andrey Popov
Izvorni znanstveni članak


Simulation and Design of Three-Level Cascaded Inverter Based on Soft Computing Method (str. 489-496)

Ayse Kocalmis Bilhan, Sedat Sunter
Izvorni znanstveni članak


Optimization of Slider-Type Hydraulic Powered Support (SHPS) Using FEA and Response Surface Methodology (str. 497-505)

Yang Yang, Qingliang Zeng, Lirong Wan, Chenglong Wang, Kuidong Gao
Izvorni znanstveni članak


Assessment of Probability of Gear Tooth Side Wear of a Planetary Gearbox (str. 506-512)

Predrag Živković*, Milosav Ognjanović, Ivica Čamagić, Milivoje Jovanović, Dragan Kalaba, Radoljub Tomić, Ivan Grgić
Izvorni znanstveni članak


Multi-objective Optimization of Hard Milling Using Taguchi Based Grey Relational Analysis (str. 513-519)

Djordje Cica, Halil Caliskan, Peter Panjan, Davorin Kramar
Izvorni znanstveni članak


Analysis of a New Vibratory Conveyor Allowing for a Sudden Stopping of the Transport (str. 520-526)

Piotr Czubak, Antoni Lis
Izvorni znanstveni članak


Segmentation and Classification of Bi-Rads Medical Images with the Imaging Biomarkers According To Level of Detail (str. 527-534)

Ratko Ivković, Mile Petrović, Branislav Daković, Branimir Jakšić, Ivana Milošević
Izvorni znanstveni članak


Analysis of Characteristics of Non-Commercial Software Systems for Assessing Flatness Error by Means of Minimum Zone Method (str. 535-541)

Branko Štrbac, Balázs Mikó, Dragan Rodić, János Nagy, Miodrag Hadžistević
Izvorni znanstveni članak


Correlation between Mobility and Gross Domestic Product at Regional Level: Case Study of Primorje-Gorski Kotar County, Croatia (str. 542-549)

Ljudevit Krpan, Svjetlana Hess, Hrvoje Baričević
Izvorni znanstveni članak


Entropy based Software Reliability Growth Modelling for Open Source Software Evolution (str. 550-557)

Abhishek Tandon, Meera Sharma, Madhu Kumari, V. B. Singh
Izvorni znanstveni članak


Multi-Objective Robust Design of New Rotate Barrel Based on Satisfaction Function (str. 558-566)

Hanzheng Sun, Zhengbao Lei, Yupeng Huang, Jianghong Yu
Izvorni znanstveni članak


Energy Management Strategy Using ANFIS Approach for Hybrid Power System (str. 567-575)

Karthik Suruli, Vennila Ila
Izvorni znanstveni članak


The Role of Internet Search Index for Tourist Volume Prediction Based on GDFM Model (str. 576-582)

Yiran Li, Mengyao Xu, Xuan Wen, Daomeng Guo
Izvorni znanstveni članak


Contact Angle Measurements at the Interface of Co-Cr Alloy Sintered by DMLS and Coated with Hydroxyapatite (str. 583-588)

Diana-Irinel Băilă, Cătălin Zaharia, Oana-Cătălina Mocioiu
Prethodno priopćenje


Comparative Analysis of Intelligent Controller Based MPPT for Photovoltaic System with Super Lift Boost Converter (str. 589-596)

Palanivel Manikannan, Kaithmalai Udhayakumar, Parthasarathi Pugazhendiran
Prethodno priopćenje


A New Procedure of Concrete Mixture Designing (str. 597-603)

Milan Kekanović, Eleonora Kekanović
Prethodno priopćenje


Pre-Peak Deformation and Damage Features of Sandstone under Cyclic Loading (str. 604-610)

Chengjie Li, Peijie Lou, Shuling Liang, Mingming Feng, Bin Pan
Prethodno priopćenje


Simulation of Slightly Degraded Reinforced Concrete Shaft Lining in Thick Topsoil (str. 611-617)

Haijian Xie, Henglin Lv
Prethodno priopćenje


An Upper Bound Solution for Continued Compression of a Cylinder (str. 627-632)

Sergei Alexandrov, Dmitry Lisovenko, Marko Vilotic
Prethodno priopćenje


The Technique of Security Print on Textiles with a Hidden Sign in the Near-Infrared Spectrum (str. 633-637)

Jana Žiljak Gršić*, Denis Jurečić, Branka Morić Kolarić, Tonči Jeličić
Prethodno priopćenje


A Side-Constrained Peer-to-Peer Carpooling Stochastic User Equilibrium Model (str. 638-647)

Ruimin Ma, Lifei Yao
Prethodno priopćenje


Application of Predictive Models for Natural Gas Needs - Current State and Future Trends Review (str. 648-655)

Dušan Bajatović, Aleksandar S. Anđelković, Ilija Ćosić, Rado Maksimović
Prethodno priopćenje


Deflection Calculation for Beam-type Structures from Measured Strain Data (str. 665-670)

Željko Flajs, Emil Veg, Nenad Gubeljak, Goran Šiniković
Prethodno priopćenje


A Critical Approach on Using Total Water Footprint of Agricultural Products as a Potential Sustainable Development Indicator (str. 671-679)

Jean Vasile Andrei, Rodica-Manuela Gogonea, Marian Zaharia, Aurelia Patrascu, Aniela Bălăcescu, Raluca Georgiana Ladaru
Pregledni rad


Posjeta: 83.925 *