Skip to the main content

Technical gazette , Vol. 20 No. 5, 2013.

  • Publication date: 25.10.2013.
  • Published on HRČAK: 25.10.2013.

Table of contents

Full text

Logical procedure for determing the appropriate method of calculating the process capability (page 739-746)

Sandro Doboviček, Tonči Mikac, Dani Damiani
Original scientific paper


The development of assembly constraints within a virtual laboratory for collaborative learning in industrial design (page 747-753)

Zona Kostić, Dragan Cvetković, Aleksandar Jevremović, Duško Radaković, Ranko Popović, Dragan Marković
Original scientific paper


Evaluation of desktop free/open source GIS software based on functional and non-functional capabilities (page 755-764)

Mohammad Akbari, Mohammad Ali Rajabi
Original scientific paper


Evaluation of tool life - tool wear in milling of Inconel 718 superalloy and the investigation of effects of cutting parameters on surface roughness with Taguchi method (page 765-774)

Ali Riza Motorcu, Abdil Kuş, Rıdvan Arslan, Yücel Tekin, Rıdvan Ezentaş
Original scientific paper


Effect of the cutting parameters on cutting forces in high speed face milling (page 775-780)

Ahmet Čekić, Đerzija Begić-Hajdarević, Malik Kulenović
Original scientific paper


A multi-server queuing model study of specific cost ratio in a port (page 781-786)

Romeo Meštrović, Branislav Dragović, Nenad Dj. Zrnić, Maja Škurić
Original scientific paper


A fuzzy based decision support model for non-traditional machining process selection (page 787-793)

Tolga Temuçin, Hakan Tozan, Jan Valíček, Marta Harničárová
Original scientific paper


Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie (page 803-810)

Srđan Bošnjak, Zoran Petković, Nebojša Gnjatović, Ivan Milenović, Boris Jerman
Original scientific paper


Integrity assessment of bucket wheel excavator welded structures by using the single selection method (page 811-816)

Marko Rakin, Miodrag Arsić, Srđan Bošnjak, Nebojša Gnjatović, Bojan Međo
Original scientific paper


The influence of impurities in printing substrate on the deformation of screen element and dot gain in coldset print (page 817-822)

Eugen Dobrić, Irena Bates, Igor Zjakić
Original scientific paper


CAMEP - Complex business activity monitoring system with event processing (page 823-829)

Govindasamy Vaiyapuri, Thambidurai Perumal
Original scientific paper


Distribution of loads in the large size bearing – problems of identification (page 831-836)

Tadeusz Smolnicki, Mariusz Stańco, Damian Pietrusiak
Original scientific paper


Conveyor design optimization as the provision of sustainability (page 837-846)

Marko Langerholc, Nenad Zrnić, Miloš Đorđević, Boris Jerman
Original scientific paper


Position and speed control of electromechanical actuator for aerospace applications (page 853-860)

Ivana Todić, Marko Miloš, Mirko Pavišić
Original scientific paper


Information and material flow modeling in system of parts regeneration in multi-level supply system (page 861-869)

Momčilo S. Đorđević, Nenad Đ. Zrnić, Milić R. Milićević, Vasilije V. Mišković
Original scientific paper


Tool monitoring system - modular structure (page 871-876)

Tihomir Mulc, Toma Udiljak, Damir Ciglar
Original scientific paper


Wake interaction of a rectangular prism behind a geometrically accurate porous barrier (page 877-882)

Marijo Telenta, Jožef Duhovnik, Franc Kosel, Viktor Šajn
Original scientific paper


A closed-form approximate solution for coupled vibrations of composite thin-walled beams with mid-plane symmetry (page 883-890)

Aleksandar Prokić, Radomir Folić, Ilija Miličić
Original scientific paper


Radial extrusion of gear like components – numerical analysis and experiment (page 891-896)

Miroslav Plančak, Malgorzata Rosochowska, Plavka Skakun
Original scientific paper


Impact of restrained thermal expansion on NPP Krško primary loop piping (page 897-904)

Pino Koc, Miroslav Halilovič, Boris Štok
Original scientific paper


The impact of the historical development of typography on modern classification of typefaces (page 905-911)

Mario Tomiša, Damir Vusić, Marin Milković
Original scientific paper


Robot path optimization for spot welding applications in automotive industry (page 913-917)

Pavol Božek
Preliminary communication


Analysis of the influence of car-following input parameters on the modelled travelling time (page 919-925)

Irena Ištoka Otković, Tomaž Tollazzi, Matjaž Šraml
Preliminary communication


Visits: 85.599 *