Hydraulic fracturing design improvements by proppant flowback mitigation method application during hydrocarbon production

Authors

DOI:

https://doi.org/10.17794/rgn.2021.1.8

Keywords:

hydraulic fracturing, proppant flowback, resin coated proppant, unconventional reservoirs, mature fields

Abstract

Proppant flowback after hydraulic fracturing treatment is quite a serious challenge that causes damage to both downhole and surface equipment, leading to unwanted workovers and production suspension, or other negative outcomes. Some special methods including preventive as well as corrective measures already exist in the industry to overcome the proppant flowback problems. However, there is no clear guidance on how to choose the method for certain conditions, particularly during the hydraulic fracturing design stages. Therefore, the authors conducted a comprehensive review of fourteen preventive technologies to systematize them and to propose an initial decision-making approach. The following methods were considered in this paper: Resin Coated Proppants (RCP), RCP with Activator, RCP with Nanoparticles, Proppant with Liquid Resin Systems (LRS), Proppant with Surface Modification Agents (SMA), Proppant with Proppant Consolidation Aid (PCA), Cylindrical Proppant, Microfibers, Thermoset Resin Fibers, Thermoset Film Strips, Deformable Isometric Particles (DIP), Expandable Proppants, Polymer Surface Modified Proppants, and In-situ Formulated Proppants. The review reveals physical, chemical, and technological properties of each method to select criteria for effective screening. So, the reader could find the appropriate proppant flowback mitigation method corresponding to a particular reservoir and the well conditions during the initial hydraulic fracturing design stages.

Author Biographies

Bimurat Sagindykov, Satbayev University

Associated Professor

Candidate of Physical and Mathematical Sciences

Cybernetics and Information Technologies Institute

Kuralay Bimuratkyzy, Expert Team LLP

Director

Downloads

Published

2021-01-22

How to Cite

Jatykov, T., Sagindykov, B., & Bimuratkyzy, K. (2021). Hydraulic fracturing design improvements by proppant flowback mitigation method application during hydrocarbon production. Rudarsko-geološko-Naftni Zbornik, 36(1). https://doi.org/10.17794/rgn.2021.1.8

Issue

Section

Petroleum Engineering and Energetics