Analysis of shaft lining stress state in anhydrite-rock salt transition zone

Authors

DOI:

https://doi.org/10.17794/rgn.2022.1.13

Keywords:

lining, salt rock, load, state of stress, transitional area, rheology, tubing

Abstract

The main question of this paper is the stress-strain state prediction of the vertical shaft's combined lining located at the interface of two layers of dolomite and salt. The study predicts geomechanical processes at the contact of the dolomite layer and the salt layer in the vicinity of the vertical shaft’s expanded section, taking into account the operating life of the vertical shaft equal to 50 years. The results combined lining’s stress-strain state, represented as a four – layer medium, where the external layer is concrete, and the three inner layers are used to account for the heterogeneity of cast-iron tubing are compared with the results received when taking into account the pipe structure in explicitly. The solution of the problem was carried out in a three-dimensional statement. The calculation of the tubing lining, considering its actual geometry, will rise the accuracy of the forecast of the stress state of the lining, which in turn will favorably affect the justification of its parameters.

Downloads

Published

2022-02-01

How to Cite

Karasev, M., Protosenya, A., Katerov, A. ., & Petrushin, V. (2022). Analysis of shaft lining stress state in anhydrite-rock salt transition zone. Rudarsko-geološko-Naftni Zbornik, 37(1). https://doi.org/10.17794/rgn.2022.1.13

Issue

Vol. 37 No. 1 (2022): No. 57

Section

Mining

License

Copyright (c) 2021 authors and journal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons-BY

Authors who publish with this journal agree to the following terms:

In agreeing this form, you certify that:

  1. You read the ethical codex of the RGN zbornik available at journal web.
  2. You submitted work is your original work, and has not previously been published and does not include any form of plagiarism.
  3. You own copyright in the submitted work, and are therefore permitted to assign the licence to publish to RGN zbornik.
  4. Your submitted work contains no violation of any existing copyright or other third party right or any material of an obscene, libellous or otherwise unlawful nature.
  5. You have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the work of which you are not the copyright owner.
  6. You have taken due care to ensure the accuracy of the work, and that, to the best of your knowledge, there are no false statements made within it.
  7. All co-authors of this submitted work are aware of, and in agreement with, the terms of this licence and that the submitted manuscript has been approved by these authors.

 

Publication licence

You retain copyright in your submitted work, according to journal license policy (CC-BY). By signing this form you agree that RGN zbornik may publish it under the publication licence. In summary the licence allows the following:

Anyone is free:

  • To copy, distribute, display, and perform the work.
  • To make derivative works.

 

Under the following conditions:

  • The original author must always be given credit.
  • The work may not be used for commercial purposes.
  • If the work is altered, transformed, or built upon, the resulting work may only be distributed under a licence identical to this one.

 

Exceptions to the licence

In addition to publishing the work printed under the above licence, RGN zbornik will also enable the work to be visible online.

The journal editorial can change the licence rules anytime but it cannot retroactively restrict author(s) rights.