Skip to the main content

Metallurgy , Vol. 51 No. 1, 2012.

  • Publication date: 02.01.2012.
  • Published on HRČAK: 01.09.2011.

Table of contents

Full text

Dilatometric and hardness analysis of C45 steel tempering with different heating-up rates (page 9-12)

J. Winczek, A. Kulawik
Original scientific paper


Microstructural evolution of a cold work tool steel after pulsed laser remelting (page 13-16)

M. Pleterski, T. Muhič, D. Klobčar, L. Kosec
Original scientific paper


Electrospark deposition for die repair (page 17-20)

J. Tušek, L. Kosec, A. Lešnjak, T. Muhič
Original scientific paper


The effect of specifi c relationship between material and coating on tribological and protective features of the product (page 21-24)

B. Sovilj, I. Sovilj-Nikić, D. Ješić
Original scientific paper


Removal of lead from the industrial and synthetic Cu-Pb-Fe alloy with argon barbotage (page 25-27)

B. Oleksiak, G. Siwiec
Original scientific paper


Microstructural evolution during friction stir welding of AlSi1MgMn alloy (page 29-33)

M. Janjić, M. Vukčević, V. Mandić, D. Pavletić, N. Šibalić
Original scientific paper


The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state (page 34-38)

P. Kovač, L. Sidjanin, D. Rajnović, B. Savković, J. Wannasin
Original scientific paper


Evaluation of abrasive waterjet produced titan surfaces topography by spectral analysis techniques (page 39-42)

K. Brillová, M. Ohlídal, J. Valíček, S. Hloch, D. Kozak, Ž. Ivandić
Original scientific paper


Influence of traverse speed on surface irregularities created by the abrasive waterjet (page 43-46)

J. Valíček, S. Hloch, I. Samardžić, M. Kušnerová, M. Zeleňák
Original scientific paper


Stress and displacement analysis of a modern design lathe body by the finite element method (FEM) (page 51-54)

R. Staniek, A. Gessner, J. Zielnica, W. Ptaszyński, A. Myszkowski, O. Ciszak, A. Stoić
Original scientific paper


Continual Measuring of Local Stress Values on Shell of the Blast Furnace Hearth and of Total Shell Expansion (page 55-58)

P. Bigoš, J. Kuľka, M. Mantič, J. Čurilla
Preliminary communication


Analysis of the possibility of estimation ecological slag propriety with use the database (page 59-62)

S. Biernat, A. W. Bydałek, P. Schlafka
Preliminary communication


Compacting of fly dusts from cupola and electric arc furnace (page 63-66)

G. Fedorko, A. Pribulová, P. Futáš, D. Baricová, P. Demeter
Preliminary communication


Influence of an induction furnace’s electric parameters on mass transfer velocity in the liquid phase (page 67-70)

R. Przyłucki, S. Golak, B. Oleksiak, L. Blacha
Preliminary communication


Efficiency and quality of inductive heating and quenching of planetary shafts (page 71-74)

B. Kosec, B. Karpe, I. Budak, M. Ličen, M. Đorđević, A. Nagode, G. Kosec
Preliminary communication


Design of casting blanks in CAPP system for parts of piston-cylinder assembly of internal combustion engines (page 75-78)

V. Todić, J. Tepić, M. Milošević, D. Lukić, M. Hadžistević
Preliminary communication


Degradation of mechanical properties of CrMo creep resistant steel operating under conditions of creep (page 79-82)

J. Michel, M. Buršák, Ilija Mamuzić
Preliminary communication


Thermophysical and structural study of IN 792-5A nickel based superalloy (page 83-86)

S. Zlá, J. Dobrovská, B. Smetana, M. Žaludová, V. Vodárek, K. Konečná
Preliminary communication


Characterization of duplex hard coatings with additional ion implantation (page 87-90)

B. Škorić, D. Kakaš, D. Ješić, M. Gostimirović, A. Miletić
Preliminary communication


A hybrid decision support system for iron ore supply (page 91-93)

A. Samolejová, J. Feliks, R. Lenort, P. Besta
Preliminary communication


Wear and corrosion performances of new friction materials for automotive industry (page 94-96)

R. Samur, A. Demir
Preliminary communication


Study of silver removal from scrap jewellery by way of the flotation process (page 97-100)

B. Oleksiak, A. Blacha
Preliminary communication


Identification of the exploatation dust in road dust (page 101-104)

B. Gajdzik, R. Wieszala, T. Wieczorek
Preliminary communication


Surface layer properties of the workpiece material in high performance grinding (page 105-108)

M. Gostimirović, P. Kovač, D. Ješić, B. Škorić, B. Savković
Preliminary communication


New geometry and technology of face-gear forming with circle line of teeth on CNC milling machine (page 109-112)

P. Frąckowiak, W. Ptaszyński, A. Stoić
Preliminary communication


Optimal finite elements method (FEM) model for the jib structure of a waterway dredger (page 113-116)

D. Kovačević, M. Soković, I. Budak, A. Antić, B. Kosec
Preliminary communication


Materials on dies for pressure die casting (page 117-120)

E. Ragan, J. Dobránsky, P. Baron, T. Olejár
Review article


Application of high temperature DTA to micro-alloyed steels (page 121-124)

B. Smetana, S. Zlá, M. Žaludová, J. Dobrovská, P. Kozelský
Review article


Classification of technical materials according to classes machinability for hydroabrasive cutting (page 125-128)

S. Hloch, J. Valíček, I. Samardžić, D. Kozak, M. Kušnerová
Review article


Transformation on steel products distribution in Poland and Slovakia (page 133-136)

R. Stefko, B. Slusarczyk, B. Kot, C. Kolmasiak
Review article


Visits: 86.522 *