Evaluating the Sawability of Rocks by Chain-Saw Machines using the PROMETHEE Technique

Authors

  • Reza Mikaeil Department of Mining and Engineering, Faculty of Environment, Urmia University of Technology, Urmia, Iran https://orcid.org/0000-0001-8404-3216
  • Akbar Esmailzadeh Department of Mining and Engineering, Faculty of Environment, Urmia University of Technology, Urmia, Iran
  • Sara Aghaei Department of Mining and Engineering, Faculty of Environment, Urmia University of Technology, Urmia, Iran
  • Sina Shaffiee Haghshenas Department of Civil Engineering, University of Calabria, 87036 Rende, Italy https://orcid.org/0000-0003-2859-3920
  • Amir Jafarpour Department of Mining and Metallurgical Engineering, Yazd University https://orcid.org/0000-0002-5734-9970
  • Javad Mohammadi School of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
  • Mohammad Ataei School of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran https://orcid.org/0000-0002-7016-8170

DOI:

https://doi.org/10.17794/rgn.2021.1.3

Keywords:

Dimensional stone quarries;, Chain-saw machine, Production rate, PROMETHEE

Abstract

One of the most significant factors in the estimation of dimension stone quarry cost is the production rate of rock cutting machines. Evaluating the production rate of chain-saw machines is a very significant and practical issue. In this research, it has been attempted to evaluate and select the suitable working-face for a quarry by examining the maximum production rate in the Dehbid and Shayan marble quarries. For this purpose, field studies were carried out which included measuring operational characteristics of the chain-saw cutting machine, the production rate and sampling for laboratory tests from seven active case studies. Subsequently, the physical and mechanical properties of rocks including: Uniaxial Compressive Strength (UCS), Brazilian Tensile Strength (BTS), Los Angeles abrasion, quartz content, water absorption percentage, porosity, Schmidt hardness and grain size for all sample measurements were studied after transferring the samples to a rock-mechanics laboratory. Finally, the sawability of the quarried working-faces was evaluated using the PROMETHEE multi-criteria decision-making (MCDM) model according to the physical and mechanical properties. The results of the study indicated that the number 1 and 5 working-faces from the Dehbid and Shayan quarries are the most suitable working-faces in terms of production rate with the maximum recorded production values (4.95 and 3.1 m2/h), and with net flow rates (2.67 and -0.36) respectively.

Downloads

Published

2021-01-22

How to Cite

Mikaeil, R., Esmailzadeh, A. ., Aghaei, S. ., Shaffiee Haghshenas, S., Jafarpour, A. ., Mohammadi, J. ., & Ataei, M. . (2021). Evaluating the Sawability of Rocks by Chain-Saw Machines using the PROMETHEE Technique. Rudarsko-geološko-Naftni Zbornik, 36(1). https://doi.org/10.17794/rgn.2021.1.3

Issue

Vol. 36 No. 1 (2021): No. 52

Section

Mining

License

Copyright (c) 2020 authors and journal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons-BY

Authors who publish with this journal agree to the following terms:

In agreeing this form, you certify that:

  1. You read the ethical codex of the RGN zbornik available at journal web.
  2. You submitted work is your original work, and has not previously been published and does not include any form of plagiarism.
  3. You own copyright in the submitted work, and are therefore permitted to assign the licence to publish to RGN zbornik.
  4. Your submitted work contains no violation of any existing copyright or other third party right or any material of an obscene, libellous or otherwise unlawful nature.
  5. You have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the work of which you are not the copyright owner.
  6. You have taken due care to ensure the accuracy of the work, and that, to the best of your knowledge, there are no false statements made within it.
  7. All co-authors of this submitted work are aware of, and in agreement with, the terms of this licence and that the submitted manuscript has been approved by these authors.

 

Publication licence

You retain copyright in your submitted work, according to journal license policy (CC-BY). By signing this form you agree that RGN zbornik may publish it under the publication licence. In summary the licence allows the following:

Anyone is free:

  • To copy, distribute, display, and perform the work.
  • To make derivative works.

 

Under the following conditions:

  • The original author must always be given credit.
  • The work may not be used for commercial purposes.
  • If the work is altered, transformed, or built upon, the resulting work may only be distributed under a licence identical to this one.

 

Exceptions to the licence

In addition to publishing the work printed under the above licence, RGN zbornik will also enable the work to be visible online.

The journal editorial can change the licence rules anytime but it cannot retroactively restrict author(s) rights.

 

Most read articles by the same author(s)

<< < 1 2