The study of energy consumption in the dimension stone cutting process

Authors

  • Reza Mikaeil
  • Babak Sohrabian Urmia University of Technology
  • Mohammad Ataei

DOI:

https://doi.org/10.17794/rgn.2018.4.6

Keywords:

Energy consumption; feed rate; peripheral speed; depth of cut; SPSS; Dimension stone

Abstract

In the dimension stone industry, predicting the energy consumption in rock cutting process and examining its relationship with machining parameters are among the most important steps to achieve the optimum conditions in terms of energy consumption. A laboratory scale cutting machine with changing machining parameters was made and its energy consumption was evaluated through the statistical analysis. Tests were carried on seven carbonate rock samples under different operating conditions at different depths of cut, feed rates and peripheral speeds. Finally, an energy consumption model was obtained through statistical studies using SPSS software. The t and F tests were used to validate the model and to control each of the independent variables. To see the prediction capability of the derived model, the scatter diagram of the observed and estimated values was plotted. The results showed that the points are very close to the 1:1 diagonal straight line. It concluded that the developed model has a high degree of accuracy with a high correlation between the predicted and the observed values. Due to its high accuracy, the proposed model can be used in the calculation of energy consumption under various operating parameters. 

Downloads

Published

2018-06-28

How to Cite

Mikaeil, R., Sohrabian, B., & Ataei, M. (2018). The study of energy consumption in the dimension stone cutting process. Rudarsko-geološko-Naftni Zbornik, 33(4). https://doi.org/10.17794/rgn.2018.4.6

Issue

Section

Mining

Most read articles by the same author(s)

<< < 1 2