Specific energy consumption of material handling by excavator in the quarrying of crushed stone

Authors

DOI:

https://doi.org/10.17794/rgn.2023.1.8

Keywords:

mining, excavator, quarry, energy consumption

Abstract

A hydraulic excavator is widely used in crushed stone quarries to perform many different operations. Previous research on material handling by excavators is most often based on laboratory testing and observation of soil materials and the digging forces in them. These results are very difficult to transfer to fieldwork during the quarrying process. Therefore, in this work, the energy consumption of an excavator while working in typical materials for a crushed stone quarry was investigated. The field measurements were performed on overburden, blasted rock material, boulders, and two different crushed materials. Energy consumption was observed only during the portion of the cycle in which the bucket digs the material. In this way, the energy consumption was mainly related to the properties of the material. The highest energy consumption was found for blasted rock material, lower in overburden, and the lowest for boulders and crushed materials. These results are important for organizing an optimal distribution of machines according to the work tasks in the quarry and ultimately for energy savings.

Downloads

Published

2023-03-06

How to Cite

Herceg, V., Klanfar, M. ., Herceg, K., & Domitrović, D. (2023). Specific energy consumption of material handling by excavator in the quarrying of crushed stone. Rudarsko-geološko-Naftni Zbornik, 38(1), 83–92. https://doi.org/10.17794/rgn.2023.1.8

Issue

Vol. 38 No. 1 (2023): No. 62

Section

Mining

License

Copyright (c) 2023 authors

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons-BY

Authors who publish with this journal agree to the following terms:

In agreeing this form, you certify that:

  1. You read the ethical codex of the RGN zbornik available at journal web.
  2. You submitted work is your original work, and has not previously been published and does not include any form of plagiarism.
  3. You own copyright in the submitted work, and are therefore permitted to assign the licence to publish to RGN zbornik.
  4. Your submitted work contains no violation of any existing copyright or other third party right or any material of an obscene, libellous or otherwise unlawful nature.
  5. You have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the work of which you are not the copyright owner.
  6. You have taken due care to ensure the accuracy of the work, and that, to the best of your knowledge, there are no false statements made within it.
  7. All co-authors of this submitted work are aware of, and in agreement with, the terms of this licence and that the submitted manuscript has been approved by these authors.

 

Publication licence

You retain copyright in your submitted work, according to journal license policy (CC-BY). By signing this form you agree that RGN zbornik may publish it under the publication licence. In summary the licence allows the following:

Anyone is free:

  • To copy, distribute, display, and perform the work.
  • To make derivative works.

 

Under the following conditions:

  • The original author must always be given credit.
  • The work may not be used for commercial purposes.
  • If the work is altered, transformed, or built upon, the resulting work may only be distributed under a licence identical to this one.

 

Exceptions to the licence

In addition to publishing the work printed under the above licence, RGN zbornik will also enable the work to be visible online.

The journal editorial can change the licence rules anytime but it cannot retroactively restrict author(s) rights.