Prethodno priopćenje

Rheological properties of ceramic slurries with colloidal binders used in the investment casting technology

J. Kolczyk ; University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland
J. Zych ; University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland

Sažetak

The article presents results of analyses of ceramic slurries made using materials currently tested in this technology, i.e.: colloidal silica (Ludox AM and Ludox SK) as a binder and Al2O3 as the ceramic matrix material. To characterise the binder, the size of colloidal binder particles, the Zeta potential and the binder pH were determined. Rheological properties were studied for slurries whose proportion of the (technologically justified) solid phase amounted to: 73; 74; 75 %. The impact of the solid phase proportion on the thickness of subsequent coats applied to the wax model, the dynamic viscosity and the density was determined. Research also included the impact of the size of matrix grains and the temperature on the above properties.

Ključne riječi

investment casting method; rheological properties; colloid silicate; dynamic viscosity

Hrčak ID:

86761

URI

https://hrcak.srce.hr/86761

Datum izdavanja:

1.1.2013.

Posjeta: 2.937 *