hrcak mascot   Srce   HID

Professional paper

RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA

Mladen Božić ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia
Ante Vučetić ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia
Petar Ilinčić ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia
Zoran Lulić ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Zagreb, Croatia

Fulltext: english, pdf (2 MB) pages 95-102 downloads: 829* cite
APA 6th Edition
Božić, M., Vučetić, A., Ilinčić, P. & Lulić, Z. (2014). RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA. Transactions of FAMENA, 38 (3), 95-102. Retrieved from https://hrcak.srce.hr/129618
MLA 8th Edition
Božić, Mladen, et al. "RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA." Transactions of FAMENA, vol. 38, no. 3, 2014, pp. 95-102. https://hrcak.srce.hr/129618. Accessed 26 Oct. 2021.
Chicago 17th Edition
Božić, Mladen, Ante Vučetić, Petar Ilinčić and Zoran Lulić. "RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA." Transactions of FAMENA 38, no. 3 (2014): 95-102. https://hrcak.srce.hr/129618
Harvard
Božić, M., et al. (2014). 'RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA', Transactions of FAMENA, 38(3), pp. 95-102. Available at: https://hrcak.srce.hr/129618 (Accessed 26 October 2021)
Vancouver
Božić M, Vučetić A, Ilinčić P, Lulić Z. RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA. Transactions of FAMENA [Internet]. 2014 [cited 2021 October 26];38(3):95-102. Available from: https://hrcak.srce.hr/129618
IEEE
M. Božić, A. Vučetić, P. Ilinčić and Z. Lulić, "RETROFIT OF A ROLLER BRAKE TESTER AT FAMENA", Transactions of FAMENA, vol.38, no. 3, pp. 95-102, 2014. [Online]. Available: https://hrcak.srce.hr/129618. [Accessed: 26 October 2021]

Abstracts
The vehicle brake tester described in this paper is placed in the Laboratory for IC Engines and Motor Vehicles at the Faculty of Mechanical Engineering and Naval Architecture (FAMENA) in Zagreb. As the device, built in 1983, was inoperative, a decision was made for retrofit rather than repair. The retrofit included a reconstruction of some parts and modification of the braking force measurement. Adaptation of monitoring and control was made on electronic components that control the roller set during the manual and the automatic operation.
Using the LabVIEW programming software, our team created a computer program for monitoring the positioning of a vehicle on the device, the measuring of vehicle mass needed for the calculation of braking coefficient, the control of operating mode (automatic or manual) and the start/stop mode of electro motors inside the device.

Keywords
vehicle; brake test; wheel force; LabVIEW

Hrčak ID: 129618

URI
https://hrcak.srce.hr/129618

Visits: 1.156 *