Drvna industrija, Vol. 62 No. 2, 2011.
Izvorni znanstveni članak
https://doi.org/10.5552/drind.2011.1036
Strength Characteristics of OSB in Bending – Difference between Upper and Lower Panel Faces
Martin Böhm
orcid.org/0000-0001-5160-7169
; Fakultet šumarstva i znanosti o drvu Sveučilišta bioloških znanosti u Pragu, Prag, Republika Češka
Přemysl Šedivka
; Fakultet šumarstva i znanosti o drvu Sveučilišta bioloških znanosti u Pragu, Prag, Republika Češka
Jan Bomba
; Fakultet šumarstva i znanosti o drvu Sveučilišta bioloških znanosti u Pragu, Prag, Republika Češka
Jan Reisner
; Fakultet šumarstva i znanosti o drvu Sveučilišta bioloških znanosti u Pragu, Prag, Republika Češka
Sažetak
This article is focused on evaluating the differences between the upper and lower faces of OSB/3 – Superfinish in the course of bending stress. OSB is a material manufactured from wood chips of a large surface area, irregular shape and unequal length, which are partly randomly distributed and at the same time not perfectly oriented. Differences regarding the content of OSB surface layers cause unequal properties, which can be demonstrated, especially under bending load. The measurements made show that OSB positioned with upper face downwards in the course of the bending test are capable of withstanding a higher load, and reaching an evidentially lower deflection, compared to those with lower face downwards.
Ključne riječi
oriented strand boards (OSB); modulus of elasticity in bending (MOE); maximum deflection; image analysis
Hrčak ID:
69460
URI
Datum izdavanja:
20.6.2011.
Posjeta: 5.265 *