Metalurgija, Vol. 51 No. 2, 2012.
Izvorni znanstveni članak
The weld-pool solidification mode of ferritic stainless steels
J. Tušek
; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
A. Lešnjak
; QTechna, Ljubljana, Slovenia
M. Pleterski
; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
D. Klobčar
; Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
Sažetak
The paper presents the analysis of solidification mode at gas tungsten arc welding (GTAW) of AISI 430 ferritic stainless steel. Two solidification modes (epitaxial and equiaxial) were discovered, which have a major influence on a weld tensile strength. The optimal welding parameters for ferritic stainless steels were found in a narrow range. They should be selected according to mechanical strength of the welded joints and not only according to their visual appearance.
Ključne riječi
ferritic stainless steel; grain growth; epitaxial; equaxial; GTAW
Hrčak ID:
74839
URI
Datum izdavanja:
2.4.2012.
Posjeta: 1.751 *