Stručni rad

Dynamic of taking out molding parts at injection molding

E. Ragan ; Technical University in Košice, Slovakia
J. Dobránsky ; Technical University in Košice, Slovakia
P. Baron ; Technical University in Košice, Slovakia
M. Kočiško ; Technical University in Košice, Slovakia
J. Svetlík ; Technical University in Košice, Slovakia

Sažetak

Most plastic parts used in automobile production are manufactured by injection molding. Their quality depends also on taking out molding and on the manipulators for it. Task of this contribution is to theoretically describe a transport of molding at taking out after injection molding in relation on its regulation. The following quantities are derived at it: the transition characteristic of the taking out system, the blocking diagram of taking out molding regulation, the amplitude and phase characteristic and the transition characteristic of action quantity at taking out molding regulation.

Ključne riječi

transport; processing plastics; manipulator; theoretically describe

Hrčak ID:

82942

URI

https://hrcak.srce.hr/82942

Datum izdavanja:

1.10.2012.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.714 *