Prethodno priopćenje
Applying the ARPSO Algorithm to Shafting Alignment Optimization Design
Shueiwan H. JUANG
; Dept. of Mechanical & Mechatronic Engineering, National Taiwan Ocean University, 2, Pein-Ning Road, Keelung 20224, Taiwan, R.O.C.
Ming-Hsiung CHANG
; Dept. of Mechanical & Mechatronic Engineering, National Taiwan Ocean University, 2, Pein-Ning Road, Keelung 20224, Taiwan, R.O.C.
Juan-Chen HUANG
; Dept. of Merchant Marine, National Taiwan Ocean University
Sažetak
Trial-and-error method for shafting alignment at the initial design stage in the shipbuilding industry is mostly carried out by shipyard designers. However, adjusting of a highly sensitive shaft line within a short period in order to obtain a reasonable positive design value for each bearing
reaction force (load) and bearing pressure for the entire propulsion shafting system is very difficult. Any minor changes in the bearing location and/or off-set design values may cause different analytical results with a large design deviation, such that the fi nal design result may not comply with the classifi cation society requirements and manufacturers’ design criteria.
The innovative ARPSO-SHAALIN design program successfully combines and integrates the Three Moment Equation Method (TMEM) for a continuous beam with the Attractive and Repulsive Particle Swarm Optimization (ARPSO) algorithm. The ARPSO algorithm searches for the values of global optimal design parameter for each bearing off-set and location of the propulsion shafting in the initial design stage in order to create a brand new optimal shafting arrangement. Design results are verifi ed and presented.
Ključne riječi
ARPSO (Attractive and Repulsive Particle Swarm Optimization) algorithm; optimization; high speed craft; propulsion shafting alignment; TMEM (Three Moment Equation Method)
Hrčak ID:
85039
URI
Datum izdavanja:
15.6.2012.
Posjeta: 1.586 *