Original scientific paper

https://doi.org/10.5552/drind.2012.1220

Quality of Corner Joints of Beech Chairs under Load

Silvana Prekrat orcid.org/0000-0003-3147-0841 ; Faculty of Forestry, Zagreb University, Croatia
Jerzy Smardzewski orcid.org/0000-0001-9101-0981 ; University of Life Sciences in Poznan, Faculty of Wood technology, Department of Furniture Design, Poznan, Poland
Mladen Brezović ; Faculty of Forestry, Zagreb University, Croatia
Stjepan Pervan orcid.org/0000-0002-0618-4993 ; Faculty of Forestry, Zagreb University, Croatia

Abstract

This paper presents quality criteria for corner joints of beech chairs by comparison of break moments during static and dynamic testing of the most frequently used type of construction joints: - round mortise and tenon. Laboratory joint testing using discursive construction methods showed a statistically supported value of the achieved results. The purpose of this paper is to investigate the possibility of shortening the testing procedure of fi nal products and evaluate the quality of fi nal products by segment testing of components in the design phase. The results showed that there is a significant dependence between the Md/Ms coeffi cient and the number of testing cycles. This opens the possibility of a new, different approach to testing the strength of constructions, using methods for testing assemblies instead of entire fi nal products in accordance with the applicable standard working methods.

Keywords

wood constructions; sitting furniture; chair joints; strength of glued beechwood joints; round mortise and tenon

Hrčak ID:

86984

URI

https://hrcak.srce.hr/86984

Publication date:

27.9.2012.

Article data in other languages: croatian

Visits: 2.465 *