Skoči na glavni sadržaj

Izvorni znanstveni članak

Initial current reduction of synchronous motors with salient poles by static converters usage

Marinko Stojkov orcid id ; Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia
Mirza Atić orcid id ; Gealan d.o.o., M. Maka Dizdara B-8, BA-75000 Tuzla, Bosnia and Herzegovina
Adamir Jahić ; JP EP BiH, DSO ED Tuzla, BA-75000 Tuzla, Bosnia and Herzegovina

Puni tekst: hrvatski pdf 548 Kb

str. 43-49

preuzimanja: 918


Puni tekst: engleski pdf 548 Kb

str. 43-49

preuzimanja: 677



The paper analyses the possibility of reducing the initial current of synchronous motor used for powering an excavator in an open coal-pit. The main generator group, which consists of three DC generators S = 1250 kW, reaches the torque moment through synchronous motor with salient poles usage, Sr = 1250 kW. The motor is accelerated as asynchronous squirrel cage motor, drawing attention to the machine acceleration period till the moment it enters synchronism. During this period, lasting up to 15 seconds, it is necessary to connect the rotor winding through a resistor, to start the acceleration as asynchronous motor and pull the machine into synchronism. After that, a synchronous motor powers the DC generators and operates as a synchronous compensator. The excitation circuits of electromotor were originally powered by the DC generators. Now, these systems are replaced by more efficient thyristor static converters. In this way, the excavator efficiency is increased, a faster response of excitation circuit is obtained and initial currents of synchronous motor are significantly reduced.

Ključne riječi

DC generators; initial current; synchronous motor; thyristor rectifier

Hrčak ID:



Datum izdavanja:


Podaci na drugim jezicima: hrvatski

Posjeta: 2.406 *