Izvorni znanstveni članak
Dimensional Stability of Elastomeric Impression Materials Disinfected in a Solution of 0.5% Chlorhexidine Gluconate and Alcohol
Tomislav Ivaniš
Jasenka Živko-Babić
Biserka Lazić
Josip Pandurić
Sažetak
Disinfection of elastomeric impression materials used in prosthetic dentistry can cause dimensional changes in the impression materials. 0.5% chlorhexidine gluconate is usually used for disinfection of impressions at the School of Dental Medicine in Zagreb.
The purpose of this study was to measure and compare linear dimensional changes of three elastomeric impression materials after their immersion in a certain disinfectant.
The master dies were made according to the ADA specification no 19. The tested materials were Panasil (addition silicone), Blend-a-scon (condensation silicone) and Impregum F (polyether). Twelve samples were immersed in disinfectant, twelve in water and twelve left in the air for four different periods of time (10 min., 30 min., 60 min and 24 hours). Linear dimensional changes were measured by a non-contact digital tool microscope.
The smallest changes were noticed in addition silicone with the least tendency to expansion. The condensation silicone contracted within a tolerant range of 0.2 - 0.4%, according to DIN 13913. Polyether expanded in the disinfectant significantly.
Our results show that the tested polyether is not appropriate for disinfection by immersion in chlorhexidine gluconate, while the other two materials underwent 24-hour immersion with linear dimensional changes within a clinically acceptable range.
Ključne riječi
elastomerics; disinfection; chlorhexidine gluconate; dimensional changes
Hrčak ID:
11031
URI
Datum izdavanja:
15.3.2000.
Posjeta: 6.384 *