Pregledni rad
IACS INCREMENTAL - ITERATIVE METHOD IN PROGRESSIVE COLLAPSE ANALYSIS OF VARIOUS HULL GIRDER STRUCTURES
Jerolim Andrić
orcid.org/0000-0001-5968-5807
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, I. Lučića 5, 10000 Zagreb, Croatia
Stanislav Kitarović
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, I. Lučića 5, 10000 Zagreb, Croatia
Mateja Bičak
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, I. Lučića 5, 10000 Zagreb, Croatia
Sažetak
Intended purpose of the paper is to compare results obtained by a different existing ultimate bending capacity assessment methods for different hull girder structures, with particular emphasis on the results obtained by the subgroup of methods comprised of the various incremental-iterative progressive collapse analysis methods based on the Smith’s approach. Within this subgroup of methods, additional consideration is given to the results obtained by different implementations of the same method prescribed by the International Association of Classification Societies (IACS) Common Structural Rules (CSR), since this method is incorporated into the OCTOPUS computer program, developed at the Faculty of Mechanical Engineering and Naval Architecture (University of Zagreb). Various characteristics and capabilities of the implemented IACS CSR incremental-iterative progressive collapse analysis method are considered on the example of the hull girder structure of the chemical tanker, along with the comparison of the results obtained by the nonlinear finite element method.
Ključne riječi
Hull girder ultimate strength; longitudinal ultimate load-capacity; progressive collapse analysis; Smith’s method
Hrčak ID:
118043
URI
Datum izdavanja:
25.3.2014.
Posjeta: 2.349 *