Skoči na glavni sadržaj

Prethodno priopćenje

Characteristics of low nickel ferritic-austenitic corrosion resistant cast steel

B. Kalandyk ; AGH University of Science and Technology, Krakow, Poland
R. Zapała ; AGH University of Science and Technology, Krakow, Poland
S. Sobula ; AGH University of Science and Technology, Krakow, Poland
M. Górny ; AGH University of Science and Technology, Krakow, Poland
L. Boroń ; Foundry Research Institute, Krakow, Poland


Puni tekst: engleski pdf 1.048 Kb

str. 613-616

preuzimanja: 783

citiraj


Sažetak

The article presents the results of microscopic examinations of corrosion resistant cast steel with reduced nickel content obtained in a test casting with varying wall thickness. Investigations were carried out in as-cast condition and after heat treatment. Regardless of the casting wall thickness, increasing the manganese and nitrogen content to about 5 % and 2 500 ppm, respectively, yields the material with a two-phase microstructure containing ferrite in an amount of 55,6 ÷ 57,2 % (magnetic method) and 52,3 ÷ 55,2 % (analytical method). Based on the results of metallographic examinations, total elimination of the secondary austenite from the microstructure was observed. Microhardness measurements showed average values of 352,3 μHV20 and 267 μHV20 for the chromium ferrite and austenite, respectively.

Ključne riječi

duplex stainless cast steels; microstructure; nitrogen; mechanical properties

Hrčak ID:

122203

URI

https://hrcak.srce.hr/122203

Datum izdavanja:

1.10.2014.

Posjeta: 1.455 *