Metalurgija, Vol. 42 No. 3, 2003.
Izvorni znanstveni članak
Analysis of Low-Carbon Steel/Tantalum Interface After Explosive Welding
B. Kosec
L. Kosec
S. Petrović
V. Gontarev
G. Kosec
M. Gojić
P. Škraba
Sažetak
The article discusses the morphology, microstructure and chemical composition of the boundary layer in explosive welding of low-carbon steel and tantalum plates. Pools of melt composed of both metals and having a heterogeneous chemical composition appear on the boundary layer. This phenomenon is the result of incomplete mixing of both: molten metals due to rapid cooling and solidification. Within the pools of alloy, a large number of non-metallic oxide inclusions, products of deoxidation of molten alloys, can be found. The non-metal inclusions are round (0.1 to 2 µm in diameter) and vary in both: size and chemical composition. The main component of the non-metal inclusions is Ta2O5, which also contains iron, manganese, and aluminium oxides. The number of non-metal inclusions is unusually high for low-carbon steel and comparable to the number of non-metal inclusions in welds. Oxygen which causes the large number of deoxidised products does not originate in the low-carbon steel, as this steel is relatively clean. The most probable source of oxygen is the oxide scale from the surface of the low-carbon steel, which was poorly cleaned prior to welding.
Ključne riječi
Hrčak ID:
128447
URI
Datum izdavanja:
1.7.2003.
Posjeta: 1.670 *