Izvorni znanstveni članak

The influence of material types on twist angles and torsion stability of a composite shaft

Zorica Djordjevic ; Faculty of Engineering, University of Kragujevac, S. Janjić 6, RS-34000 Kragujevac, Serbia
Mirko Blagojevic ; Faculty of Engineering, University of Kragujevac, S. Janjić 6, RS-34000 Kragujevac, Serbia
Vesna Marjanovic orcid.org/0000-0001-6266-5540 ; Faculty of Engineering, University of Kragujevac, S. Janjić 6, RS-34000 Kragujevac, Serbia
Sasa Jovanovic ; Faculty of Engineering, University of Kragujevac, S. Janjić 6, RS-34000 Kragujevac, Serbia

Sažetak

The advantages of composite materials over the conventional ones include the ability to vary their properties in order to ensure the best combination for each application. This is achieved through selection of their constituent materials, quantities, distribution and fibre orientation angle. In some cases, the best results can be achieved by using a combination of composite and traditional metal materials. This paper analyses shafts made from a combination of aluminium and different composite materials – carbon fibre/epoxy, glass fibre/epoxy, and aramid fibre/epoxy. The influence of these materials on twist angle values and critical torques that impair the shaft stability has also been discussed. Finally, an experimental analysis of the shaft that exhibited the best properties (carbon fibres/epoxy) has been performed.

Ključne riječi

aramid fibre; carbon fibre; glass fibre; hybrid aluminium/composite shaft

Hrčak ID:

129037

URI

https://hrcak.srce.hr/129037

Datum izdavanja:

29.10.2014.

Podaci na drugim jezicima: hrvatski

Posjeta: 4.204 *